LP3470IM5-4.63
| Parameters | |
|---|---|
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.63 V |
| Subcategory | Power Management Circuits |
| Voltage - Rated DC | 5V |
| Max Power Dissipation | 300mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1V |
| Base Part Number | LP3470 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 500mV |
| Operating Supply Current | 16μA |
| Nominal Supply Current | 30μA |
| Power Dissipation | 300mW |
| Adjustable Threshold | NO |
| Quiescent Current | 16μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1ms Minimum |
| Supply Current-Max (Isup) | 0.03mA |
| Min Reset Threshold Voltage | 4.5837V |
| Max Reset Threshold Voltage | 4.6763V |
| Threshold Voltage | +4.63V |
| Undervoltage Threshold | 4.5837V |
| Overvoltage Threshold | 4.6763V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Lifecycle Status | NRND (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
LP3470IM5-4.63 Overview
It is mounted through 5 terminals on the power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Power management is possible to find a series of 1 functions. This power management is made up of 1 channels which are available in a series format. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 1V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. The power management is mounted by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 5 pins on IC management. This power management has 5 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 500mV volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Mounting type Surface Mount is recommended. This range of temperature should be set for the supervisors: -40°C~85°C TJ. Power management has an output of Open Drain or Open Collector during operation. There is a 16μA supply current present in the power management. In addition, IC management are other features such as [0], to mention only a few. To find similar IC managements from the manufacturer, you can always search by LP3470.
LP3470IM5-4.63 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 500mV
16μA operating supply current
LP3470IM5-4.63 Applications
There are a lot of Texas Instruments LP3470IM5-4.63 Voltage Supervisors applications.
- Medical-specific insulation monitor
- Detection of phase sequence
- Smartphones
- Military communications
- Satellite navigation
- Utility meter
- Automotive permanent magnet synchronous motors
- Consumer electronics
- Efficient information transmission
- Dash board
