LP3470IM5X-4.63
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.63 V |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 300mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1V |
| Base Part Number | LP3470 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 500mV |
| Operating Supply Current | 16μA |
| Power Dissipation | 300mW |
| Adjustable Threshold | NO |
| Quiescent Current | 16μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.63V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1ms Minimum |
| Supply Current-Max (Isup) | 0.03mA |
| Min Reset Threshold Voltage | 4.5837V |
| Max Reset Threshold Voltage | 4.6763V |
| Threshold Voltage | +4.63V |
| Undervoltage Threshold | 4.5837V |
| Overvoltage Threshold | 4.6763V |
| Length | 2.92mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
LP3470IM5X-4.63 Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. Power management is packaged in a Tape & Reel (TR) way. Please find attached 1 functions for your reference in this IC power. Power management consists of 1 channels, each of which can be used independently. IC management is packaged as a SC-74A, SOT-753 package. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. IC management is specified that the package peak reflow temperature should be 260. In a 1V supply voltage, the power management conducts. Power management conducts at a voltage of 1. Surface Mount mounts IC management. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 5 pins that are attached to IC management. This power management system has 5 pins. There should be a minimum voltage supply (Vsup) of 500mV for this PMIC. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TJ. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 16μA. Additionally, there are many other features that can be found inside of the power management, such as [0]. For similar manage ics search of the manufacturer, you can always refer to LP3470, the base PMIC number.
LP3470IM5X-4.63 Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 500mV
16μA operating supply current
LP3470IM5X-4.63 Applications
There are a lot of Texas Instruments LP3470IM5X-4.63 Voltage Supervisors applications.
- Power distribution systems of ICU
- Fire equipment power monitoring system
- Smart meter
- Urban rail transit weak current power monitoring
- Military electronics
- Power distribution systems of infant care room
- Microcontroller system
- Insulation fault location system
- Military communications
- Utility meter
