LP3470M5-3.08/NOPB
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 22 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -20°C~85°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 300mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.4V |
| Base Part Number | LP3470 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Max Output Current | 10mA |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 500mV |
| Operating Supply Current | 16μA |
| Nominal Supply Current | 16μA |
| Power Dissipation | 300mW |
| Adjustable Threshold | NO |
| Quiescent Current | 16μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.08V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1ms Minimum |
| Supply Current-Max (Isup) | 0.03mA |
| Min Reset Threshold Voltage | 2.4V |
| Max Reset Threshold Voltage | 3.1108V |
| Threshold Voltage | +3.08V |
| Undervoltage Threshold | 3.0492V |
| Overvoltage Threshold | 3.1108V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP3470M5-3.08/NOPB Overview
As you can see, this power management is mounted through 5 terminals. Packaged in a Cut Tape (CT)-shape, IC management comes with a number of features. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. A supply voltage of 2.4V is used to conduct the PMIC chip. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Power management is included in the Surface Mount mount. There is a subcategory called Power Management Circuits for this power management. The total number of pins on this power management is 5. There are 5 pins on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 500mV. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type is Surface Mount. This power management is the recommended temperature range for the supervisors: -20°C~85°C TJ. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. There is a 16μA supply current present in the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to LP3470, which is the base power ics number.
LP3470M5-3.08/NOPB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 500mV
16μA operating supply current
LP3470M5-3.08/NOPB Applications
There are a lot of Texas Instruments LP3470M5-3.08/NOPB Voltage Supervisors applications.
- Satellite navigation
- Household appliances
- Power communication system
- Rechargeable batteries
- WiFi router
- Urban rail transit weak current power monitoring
- Transformer load monitoring equipment
- Refrigeration
- Military communications
- Utility meter
