LP3470M5-4.00/NOPB
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -20°C~85°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 300mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.4V |
| Base Part Number | LP3470 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 500mV |
| Operating Supply Current | 16μA |
| Power Dissipation | 300mW |
| Adjustable Threshold | NO |
| Quiescent Current | 16μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1ms Minimum |
| Supply Current-Max (Isup) | 0.03mA |
| Min Reset Threshold Voltage | 3.96V |
| Max Reset Threshold Voltage | 4.04V |
| Threshold Voltage | +4V |
| Undervoltage Threshold | 3.96V |
| Overvoltage Threshold | 4.04V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP3470M5-4.00/NOPB Overview
As you can see, this power management is mounted through 5 terminals. A Tape & Reel (TR) package is used to package the power management. Please refer to this PMIC for 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. IC management is specified that the package peak reflow temperature should be 260. A supply voltage of 2.4V is used to conduct the PMIC chip. Power management conducts at a voltage of 1. Surface Mount is the one that mounts power management. There is a subcategory called Power Management Circuits for this power management. In total, IC powers are 5 pins on the board. Power managment ic pin count is 5. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 500mV, which is the minimum supply voltage that should be applied. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. The mounting type of the supervisors is Surface MountThe supervisors should be set to the following temperature: -20°C~85°C TJ. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. In order to maintain a stable supply current for the power management, 16μA is the recommended value. For similar manage ics search of the manufacturer, you can always refer to LP3470, the base PMIC number.
LP3470M5-4.00/NOPB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 500mV
16μA operating supply current
LP3470M5-4.00/NOPB Applications
There are a lot of Texas Instruments LP3470M5-4.00/NOPB Voltage Supervisors applications.
- Display equipment
- Power communication system
- Low voltage/high power - AI, GPU
- Power distribution systems of ICU
- Consumer electronics
- Urban rail transit weak current power monitoring
- Medical-specific isolation transformer
- Fire equipment power monitoring system
- Power distribution systems of CCU
- Radio
