LP3470M5-4.38/NOPB
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -20°C~85°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 300mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.4V |
| Base Part Number | LP3470 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 500mV |
| Operating Supply Current | 16μA |
| Power Dissipation | 300mW |
| Adjustable Threshold | NO |
| Quiescent Current | 16μA |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.38V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 1ms Minimum |
| Supply Current-Max (Isup) | 0.03mA |
| Min Reset Threshold Voltage | 4.3362V |
| Max Reset Threshold Voltage | 4.4238V |
| Threshold Voltage | +4.38V |
| Undervoltage Threshold | 4.3362V |
| Overvoltage Threshold | 4.4238V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP3470M5-4.38/NOPB Overview
There are 5 terminals on this power management that allow it to be mounted. Packaged in a Cut Tape (CT)-shape, IC management comes with a number of features. For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes SC-74A, SOT-753 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. During the reflow process, a peak temperature of 260 is specified for the package. A supply voltage of 2.4V is used to conduct the PMIC chip. IC management is possible to find a succession of 1 voltages that have been checked. Using Surface Mount, IC management is mounted. The power management belongs to the Power Management Circuits subcategory. It has a total of 5 pins that are attached to IC management. Pin count of the power management is 5. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 500mV. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. A Surface Mount mounting type is recommended. Temperature setting for the supervisors should be -20°C~85°C TJ. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. As far as the supply current of the power management is concerned, it is 16μA. A similar IC managements number of the manufacturer can always be found by using LP3470, the base power ics number.
LP3470M5-4.38/NOPB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 500mV
16μA operating supply current
LP3470M5-4.38/NOPB Applications
There are a lot of Texas Instruments LP3470M5-4.38/NOPB Voltage Supervisors applications.
- Radio
- Unattended substation automation
- Radar
- DC stabilized power supply module
- Analog circuit
- Stable power system
- Power distribution systems of operating room
- Dash board
- Set top box
- Microprocessor system
