LP3950SL/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFLGA |
| Number of Pins | 32 |
| Weight | 113.398093g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Feature | I2C |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight, Camera Flash |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LP3950 |
| Operating Supply Voltage | 2.9V |
| Power Supplies | 2.8V |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 0V |
| Nominal Supply Current | 1mA |
| Output Current | 300mA |
| Max Supply Current | 850μA |
| Quiescent Current | 850μA |
| Voltage - Output | 5V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 3V |
| Max Input Voltage | 7.2V |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 50mA |
| Internal Switch(s) | Yes |
| fmax-Min | 0.4 MHz |
| Dimming | PWM |
| Number of Segments | 6 |
| Switching Frequency | 2MHz |
| Voltage - Supply (Max) | 2.9V |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Height | 800μm |
| Length | 5.5mm |
| Width | 4.5mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP3950SL/NOPB Overview
It saves board space with the 32-WFLGA package. Surface Mount is used to mount the led light driver.Initially, it emerges as a DC DC Regulator with high efficiency and a high degree of reliability.When the temperature is -40°C~85°C TA, it can work normally.Backlight, Camera Flash has significant advantages.It operates with terminations of 32.It has a base configuration of 32 pins.If the voltage supply is below 2.7V, undetermined failures may occur.There are 6 segments in it.The mount is in the way of Surface Mount.LED drivers can be found under the base part number LP3950.In this case, 6V is acceptable.5V is the voltage output.This device is optimized to deliver a maximum voltage level of 2.9V.Further, it can be classified as Display Drivers based on its characteristics.A voltage of 3V is its minimal input voltage.As a result, it is designed to operate at a minimal voltage of 0V to ensure the most efficiency possible.In terms of supply current, 7.2V is the maximum value.This device is able to provide high efficiency when the maximal supply current should be less than 850μA.There is no current available to supply to the load.It is necessary to power systems with a voltage of 2.9VElectronic components can function properly when their switching frequency is set to 2MHz.When no external factors are present, there is 850μA current consumption.
LP3950SL/NOPB Features
Available in the 32-WFLGA package
Operating temperature of -40°C~85°C TA
Supply voltage of 2.8V
Operating with the supply voltage of 2.9V
Switching frequency of 2MHz
LP3950SL/NOPB Applications
There are a lot of Texas Instruments LP3950SL/NOPB LED Driver ICs applications.
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Replacement lamps
- Sports Facility Lighting
- LED Lightings for Industrial Equipment
- Refrigeration lighting
- Panel lighting
- High-end retail lighting
- LED backlight driver for LCD displays for portable equipment
- LED headlights
- Medical surgery lighting
