LP3954RL/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-WFBGA, DSBGA |
| Number of Pins | 36 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e2 |
| Feature | I2C |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver (Sn/Ag) |
| Applications | Backlight, Camera Flash |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LP3954 |
| Number of Outputs | 13 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 1mA |
| Output Current | 400mA |
| Max Supply Current | 1mA |
| Quiescent Current | 400μA |
| Voltage - Output | 4V~5.3V |
| Topology | Step-Up (Boost) |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 900mA Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Supply Voltage1-Nom | 2.8V |
| Number of Segments | 6 |
| Switching Frequency | 2MHz |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 725μm |
| Length | 0m |
| Width | 0m |
| Thickness | 400μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP3954RL/NOPB Overview
Space is saved using its 36-WFBGA, DSBGA package. This LED driver has 13 outputs.We are using Surface Mount as the mounting method.In this case, it emerges as a DC DC Regulator with a high efficiency.If the led driver ic is set to -30°C~85°C TA, it will work normally.Backlight, Camera Flash has many advantages.It is designed to work with 36 terminations.With a base of 36, this LED light driver is configured.If the voltage supply is less than 3V, undetermined failures will occur.A total of 6 segments are estimated.As you can see, it is mounted by Surface Mount.The LED driver is based on part number LP3954.As a maximum value, 5.5V is acceptable.The voltage output by it is 4V~5.3V.Additionally, it is categorized into Display Drivers according to its characteristics.To meet highest efficiency standards, it works on a supply voltage of 2.7V.When the maximum supply current is less than 1mA, this device is capable of providing high efficiency.A load can be supplied with 400mA current.As long as the switching frequency is maintained at 2MHz, this electronic component is able to perform all of its functions properly.In the absence of external factors, 400μA current is consumed.
LP3954RL/NOPB Features
Available in the 36-WFBGA, DSBGA package
Operating temperature of -30°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 2MHz
LP3954RL/NOPB Applications
There are a lot of Texas Instruments LP3954RL/NOPB LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- Industrial LED Lighting: Image Recognition Devices
- High-end retail lighting
- A- lamps
- Scanners and Handy Terminals
- General lighting
- Other Electronic Devices
- Museum lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- LED backlight driver for LCD displays for Tablets and Note PCs
