LP55231SQE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LP55231 |
| Output Voltage | 5.5V |
| Max Output Current | 25.5mA |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Output Current | 25.5mA |
| Max Supply Current | 750μA |
| Quiescent Current | 800μA |
| Max Output Voltage | 5.5V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Output Current per Channel | 25.5mA |
| Min Output Voltage | 3.6V |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| fmax-Min | 0.4 MHz |
| Dimming | PWM |
| Number of Segments | 9 |
| Switching Frequency | 1.25MHz |
| Multiplexed Display Capability | YES |
| Touchscreen | Capacitive |
| Nominal Input Voltage (DC) | 3.6V |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP55231SQE/NOPB Overview
The board's 24-WFQFN Exposed Pad package saves space. Mounting is done according to the Surface Mount method.It emerges as a DC DC Regulator with high efficiency.-30°C~85°C TA is the operating temperature and it works fine.Backlight provides many benefits.For its operation, terminations with a value of 0 are used.To form its configuration, there are 24 pins.It consists of 9 segments.The mount is in the direction of Surface Mount.Under the base part number LP55231, you'll find this LED driver.It is acceptable to have a maximum voltage of 5.5V.Additionally, it can be classified as Display Drivers based on its characteristics.The minimal input voltage is 2.7V.As a result, it is designed to operate at a minimal voltage of 2.7V to ensure the most efficiency possible.Whenever the maximum supply current is allowed, the value reaches 5.5V.If the maximum current supply is less than 750μA, this device provides high efficiency.A load can be supplied with 25.5mA current.As long as the switching frequency is maintained at 1.25MHz, this electronic component is able to perform all of its functions properly.It is capable of delivering all benefits of a LED driver when operating with the maximal output current of 25.5mA.In the absence of external factors, 800μA current is consumed.There is 5.5V voltage at the output terminal.If the output voltage exceeds 5.5V, it should be corrected.The voltage it outputs stays at 3.6V.
LP55231SQE/NOPB Features
Available in the 24-WFQFN Exposed Pad package
Operating temperature of -30°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1.25MHz
Output voltage of 5.5V
LP55231SQE/NOPB Applications
There are a lot of Texas Instruments LP55231SQE/NOPB LED Driver ICs applications.
- Architectural lighting
- Scanners and Handy Terminals
- Amusement Machines
- LED Lighting PFCs, Linear Dimmable
- Other Electronic Devices
- Panel lighting
- LED headlights
- Dimmable LED for vehicle interiors
- LED backlight driver for LCD displays for Tablets and Note PCs
- Flicker-free LED Lighting using R1580N
