LP5523TM/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 25-WFBGA |
| Number of Pins | 25 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 25 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Frequency | 1.25MHz |
| Base Part Number | LP5523 |
| Number of Outputs | 9 |
| Output Voltage | 5.5V |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Output Current | 25.5mA |
| Max Supply Current | 950μA |
| Quiescent Current | 800μA |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Output Current per Channel | 25.5mA |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| fmax-Min | 0.4 MHz |
| Dimming | PWM |
| Number of Segments | 9 |
| Switching Frequency | 1.25MHz |
| Multiplexed Display Capability | YES |
| Touchscreen | Capacitive |
| Height | 675μm |
| Length | 0m |
| Width | 0m |
| Thickness | 420μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP5523TM/NOPB Overview
Additionally, there is a 25-WFBGA package for saving space.LED drivers design with 9 outputs.The mounting method adopted is Surface Mount.When it emerges as a DC DC Regulator, it performs extremely well and is highly reliable.-30°C~85°C TA is the operating temperature and it works fine.There are considerable benefits for Backlight.A frequency of 1.25MHz is used to operate it.The system operates with a termination of 0.This LED driver is configured with a base of 25 pins.It is estimated that there are 9 segments.It has been mounted on Surface Mount.It is under the base part number LP5523 that you can find this LED driver.5.5V is an acceptable voltage.According to its characteristics, it is also classified into Display Drivers.With 2.7V as the minimal input voltage, it operates.The maximum supply current is 5.5V.As long as the supply current is less than 950μA, this device can provide high efficiency.The load is capable of receiving 25.5mA current.The electronic component can function fully when the switching frequency is maintained at 1.25MHz.The consumption of current is 800μAin the absence of external factors.This device has a voltage output of 5.5V volts.
LP5523TM/NOPB Features
Available in the 25-WFBGA package
Operating temperature of -30°C~85°C TA
Frequency of 1.25MHz
Supply voltage of 3.6V
Switching frequency of 1.25MHz
Output voltage of 5.5V
LP5523TM/NOPB Applications
There are a lot of Texas Instruments LP5523TM/NOPB LED Driver ICs applications.
- General lighting
- Medical surgery lighting
- Amusement Machines
- Down lighting
- Linear fluorescent
- LED Lightings for Inspection Devices
- A- lamps
- Industrial LED Lighting: Image Recognition Devices
- Down lights
- Stage Lighting and Signage
