LP55281RL/NOPB
| Parameters | |
|---|---|
| Base Part Number | LP55281 |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 1mA |
| Output Current | 400mA |
| Max Supply Current | 600μA |
| Quiescent Current | 350μA |
| Voltage - Output | 4V~5.3V |
| Topology | Step-Up (Boost) |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| Low Level Output Current | 40mA |
| fmax-Min | 13 MHz |
| Dimming | I2C, SPI |
| Number of Segments | 12 |
| Switching Frequency | 2MHz |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | YES |
| Data Input Mode | SERIAL |
| Height | 725μm |
| Length | 0m |
| Width | 0m |
| Thickness | 400μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-WFBGA, DSBGA |
| Number of Pins | 36 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e2 |
| Feature | I2C |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver (Sn/Ag) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
LP55281RL/NOPB Overview
In order to save board space, the led driver uses the 36-WFBGA, DSBGA package. To mount, use Surface Mount.In this case, the result is a DC DC Regulator with high efficiency.It is possible for the led light driver to operate at a temperature of -30°C~85°C TA.Backlight has many benefits.There are 36 terminations associated with it.With a base of 36, this LED light driver is configured.Undetermined failures may occur when the voltage supply is less than 3V.A total of 12 segments are estimated.It has been mounted on Surface Mount.LED drivers are found under the base part number LP55281.As a maximum value, 5.5V is acceptable.There is 4V~5.3V voltage output from this device.Moreover, it can be classified as Display Drivers due to its characteristics.For maximum efficiency, it requires a minimal supply voltage of 2.7V.If the maximum supply current is less than 600μA, the device is capable of providing high efficiency.There is no current that can be supplied to the load.As long as the switching frequency is maintained at 2MHz, this electronic component is able to perform all of its functions properly.In the absence of external factors, 350μA current is consumed.
LP55281RL/NOPB Features
Available in the 36-WFBGA, DSBGA package
Operating temperature of -30°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 2MHz
LP55281RL/NOPB Applications
There are a lot of Texas Instruments LP55281RL/NOPB LED Driver ICs applications.
- LED Lightings for Industrial Equipment
- Museum lighting
- Down lights
- Scanners and Handy Terminals
- High-end retail lighting
- Amusement Machines
- White LED Backlight for portable equipment
- Down lighting
- Street lighting
- Sports Facility Lighting
