LP55281TL/NOPB
| Parameters | |
|---|---|
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LP55281 |
| Pin Count | 36 |
| Power Supplies | 3/5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 1mA |
| Output Current | 400mA |
| Max Supply Current | 600μA |
| Quiescent Current | 350μA |
| Voltage - Output | 4V~5.3V |
| Topology | Step-Up (Boost) |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| Low Level Output Current | 40mA |
| fmax-Min | 13 MHz |
| Dimming | I2C, SPI |
| Number of Segments | 12 |
| Switching Frequency | 2MHz |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | YES |
| Data Input Mode | SERIAL |
| Height | 675μm |
| Length | 3.5mm |
| Width | 3.3mm |
| Thickness | 675μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-WFBGA |
| Number of Pins | 36 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | I2C |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
LP55281TL/NOPB Overview
Its 36-WFBGA package is used to save board space. The led light driver is mounted using Surface Mount.It emerges as a DC DC Regulator with high efficiency.At -30°C~85°C TA, the led driver is capable of operating.The benefits of Backlight are considerable.The operation of this system is supported by 36 terminations.It has a base of 36 pins.Under 3V voltage supply, undetermined failures may occur.A total of 12 segments are estimated.It has been mounted on Surface Mount.LP55281 is the base part number for this LED driver.The voltage of 5.5V can be supplied.It has a voltage output of 4V~5.3V.The device has a pin count of 36.Additionally, it can be classified as Display Drivers based on its characteristics.To meet high efficiency standards, it works with a voltage of 2.7V.It is possible to obtain a high efficiency with this device when the maximum supply current is less than 600μA.In this case, the load can only be supplied with 400mA current.This electronic component can fully perform its functions when the switching frequency is kept at 2MHz.A current of 350μA is consumed in the absence of external influences.
LP55281TL/NOPB Features
Available in the 36-WFBGA package
Operating temperature of -30°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 2MHz
LP55281TL/NOPB Applications
There are a lot of Texas Instruments LP55281TL/NOPB LED Driver ICs applications.
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Medical surgery lighting
- Stage Lighting and Signage
- Constant Voltage Power Source for portable equipment
- Architectural lighting
- OLED power supply for portable equipment
- Sports Facility Lighting
- LED Lightings for Industrial Equipment
- Dimmable LED for vehicle interiors
