LP8501TMX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 16 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 25-WFBGA |
| Number of Pins | 25 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 25 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Base Part Number | LP8501 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Quiescent Current | 600μA |
| Supply Current-Max | 0.001mA |
| Voltage - Output | 4.5V |
| Topology | Switched Capacitor (Charge Pump) |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 25.5mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 9 |
| Switching Frequency | 1.25MHz |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 675μm |
| Length | 0m |
| Width | 0m |
| Thickness | 420μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP8501TMX/NOPB Overview
Save board space with 25-WFBGA package. Surface Mount represents this mounting method.With high efficiency and reliable performance, it emerges as a DC DC Regulator.The LED driver has the capability of operating at a temperature of -30°C~85°C TA.It is clear that Backlight will benefit from the program.In this case, it operates with terminations of 0.Its configuration is based on 25 pins.Under 2.7V voltage supply, undetermined failures may occur.It is estimated that there are 9 segments.On the Surface Mount, a device is mounted.Under the base part number LP8501, you'll find this LED driver.It is acceptable for the supply voltage to be 5.5V.A voltage of 4.5V is produced by it.It is also classified into Display Drivers according to its characteristics.The maximum efficiency can be achieved by operating it at a minimal voltage of 2.7V.It's possible for this electronic component to fully function when the switching frequency is maintained at 1.25MHz.No external factors result in 600μA current consumption.
LP8501TMX/NOPB Features
Available in the 25-WFBGA package
Operating temperature of -30°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1.25MHz
LP8501TMX/NOPB Applications
There are a lot of Texas Instruments LP8501TMX/NOPB LED Driver ICs applications.
- Gallery lighting
- Museum lighting
- Replacement lamps
- OLED power supply for portable equipment
- Auxiliary lights for on-vehicle cameras
- Street lighting
- Portable lighting
- Linear fluorescent
- A- lamps
- Sports Facility Lighting
