LP8550TLX-A/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 18 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 25-WFBGA, DSBGA |
| Number of Pins | 25 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 25 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight, Lighting |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LP8550 |
| Number of Outputs | 6 |
| Max Supply Voltage | 22V |
| Max Output Voltage | 40V |
| Voltage - Output | 40V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 22V |
| Output Current per Channel | 450mA |
| Current - Output / Channel | 450mA Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 6 |
| Switching Frequency | 1.25MHz |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Height | 675μm |
| Length | 3mm |
| Width | 2.8mm |
| Thickness | 675μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP8550TLX-A/NOPB Overview
To save board space, it uses the 25-WFBGA, DSBGA package. LED drivers have a total of 6 outputs that are used in the design of the drivers.The led driver mounting is done by using Surface Mount.This emerges as a DC DC Regulator with high efficiency and reliability.It is possible for the led light driver to operate at a temperature of -30°C~85°C TA.Backlight, Lighting provides many benefits.It operates with 25 terminations.With a base of 25, this LED light driver is configured.It is possible that failures will occur if the voltage supply is below 2.7V.A total of 6 segments have been created.Surface Mount is mounted in the way.It can be found under the part number LP8550.It is acceptable to operate with a supply voltage of 22V.It has a voltage output of 40V.Initially, it accepts a voltage of 5.5V.When the maximum supply current is allowed, it reaches 22V.This electronic component can fully perform its functions when the switching frequency is kept at 1.25MHz.Voltages above 40V should not be allowed.
LP8550TLX-A/NOPB Features
Available in the 25-WFBGA, DSBGA package
Operating temperature of -30°C~85°C TA
Supply voltage of 12V
Switching frequency of 1.25MHz
LP8550TLX-A/NOPB Applications
There are a lot of Texas Instruments LP8550TLX-A/NOPB LED Driver ICs applications.
- Museum lighting
- Portable lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Sports Facility Lighting
- Street lighting
- Down lighting
- Linear fluorescent
- Medical surgery lighting
- Auxiliary lights for on-vehicle cameras
- A- lamps
