LP8552TLE-E06/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 25-WFBGA, DSBGA |
| Number of Pins | 25 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 25 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Base Part Number | LP8552 |
| Number of Outputs | 6 |
| Max Supply Voltage | 22V |
| Voltage - Output | 40V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 22V |
| Output Current per Channel | 450mA |
| Internal Switch(s) | Yes |
| fmax-Min | 0.4 MHz |
| Dimming | PWM |
| Number of Segments | 12 |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Nominal Input Voltage (DC) | 12V |
| Height | 675μm |
| Length | 3mm |
| Width | 2.8mm |
| Thickness | 675μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP8552TLE-E06/NOPB Overview
There is also a 25-WFBGA, DSBGA package that is used to save space on the board. In LED drivers, the outputs are all set to 6.In order to mount the led light driver, Surface Mount is used.The system emerges as a DC DC Regulator with high efficiency.The LED driver is capable of operating at a temperature of -40°C~85°C TA.The benefits are considerable for Backlight.In this case, there are 25 terminations.With a base of 25, this LED light driver is configured.It is likely that undetermined failures will occur if the voltage supply is less than 2.7V.There are 12 segments in it.It is mounted in the way of Surface Mount.The LED driver is available under the part number LP8552.22V is a reasonable voltage.40V is the output voltage.With a minimum input voltage of 5.5V volts, it can operate.In the case of supply current, there is a maximum value of 22V.
LP8552TLE-E06/NOPB Features
Available in the 25-WFBGA, DSBGA package
Operating temperature of -40°C~85°C TA
Supply voltage of 12V
LP8552TLE-E06/NOPB Applications
There are a lot of Texas Instruments LP8552TLE-E06/NOPB LED Driver ICs applications.
- General lighting
- Down lighting
- Stage Lighting and Signage
- Scanners and Handy Terminals
- Amusement Machines
- Dimmable LED for vehicle interiors
- LED headlights
- Medical surgery lighting
- Stage and Studio lighting
- LED Lightings for Inspection Devices
