LP8552TLE/NOPB
| Parameters | |
|---|---|
| Height | 675μm |
| Length | 3mm |
| Width | 2.8mm |
| Thickness | 675μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 25-WFBGA |
| Number of Pins | 25 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 25 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Frequency | 400kHz |
| Base Part Number | LP8552 |
| Number of Outputs | 6 |
| Max Supply Voltage | 22V |
| Min Supply Voltage | 5.5V |
| Output Current | 450mA |
| Max Supply Current | 3mA |
| Voltage - Output | 40V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 22V |
| Output Characteristics | STANDARD |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| fmax-Min | 0.4 MHz |
| Dimming | PWM |
| Number of Segments | 12 |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Nominal Input Voltage (DC) | 12V |
LP8552TLE/NOPB Overview
Using its 25-WFBGA package, it is possible to save board space. LED drivers use 6 outputs for their design.The mounting method adopted is Surface Mount.When it emerges as a DC DC Regulator, it shows high-performance and reliability.-40°C~85°C TA is a valid operating temperature for the led driver.Backlight has many benefits.The frequency of 400kHz is used as the basis for its operation.It operates using 25 terminations.There are 25 pins on its base.Undetermined failures may occur when the voltage supply is less than 2.7V.There are 12 segments in it.The mount is in the direction of Surface Mount.It is under the base part number LP8552 that you can find this LED driver.22V is a reasonable voltage.The output voltage of the device is 40V.It operates with the minimal input voltage of 5.5V.To meet the highest efficiency standards, it can be operated with a minimum supply voltage of 5.5V.It reaches 22V when the maximum supply current is allowed.When the maximum supply current is below 3mA, it is capable of delivering high efficiency.It is possible to supply the load with 450mA current.
LP8552TLE/NOPB Features
Available in the 25-WFBGA package
Operating temperature of -40°C~85°C TA
Frequency of 400kHz
Supply voltage of 12V
LP8552TLE/NOPB Applications
There are a lot of Texas Instruments LP8552TLE/NOPB LED Driver ICs applications.
- Constant Voltage Power Source for portable equipment
- A- lamps
- Architectural lighting
- Amusement Machines
- Gallery lighting
- Medical surgery lighting
- High-end retail lighting
- Refrigeration lighting
- Stage and Studio lighting
- Industrial LED Lighting: Image Recognition Devices
