LP8555YFQR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-UFBGA, DSBGA |
| Number of Pins | 36 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Frequency | 500kHz 1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LP8555 |
| Number of Outputs | 12 |
| Max Supply Voltage | 20V |
| Max Output Voltage | 28V |
| Voltage - Output | 7V~28V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 20V |
| Output Current per Channel | 180mA |
| Min Output Voltage | 7V |
| Internal Switch(s) | Yes |
| fmax-Min | 0.05 MHz |
| Dimming | PWM |
| Number of Segments | 12 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Height | 675μm |
| Length | 0m |
| Width | 0m |
| Thickness | 420μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP8555YFQR Overview
In order to save board space, the 36-UFBGA, DSBGA package is used. As part of the design of this LED driver, there are 12 outputs that have been used.It is possible to mount the led driver using Surface Mount.When it emerges as a DC DC Regulator, it performs extremely well and is highly reliable.The LED driver is capable of operating at a temperature of -40°C~85°C TA.Backlight benefits significantly from the program.In this case, the frequency is 500kHz 1MHz.In order for it to operate, it has 36 terminations.This module has 36 pins as its base.The segment count is 12.It's mounted on the way to Surface Mount.Under the base part number LP8555, you will find this LED driver.Ideally, the supply voltage should be 20V.The voltage at the output terminal is 7V~28V.With a minimum input voltage of 2.7V volts, it can operate.It is possible to supply current up to 20V.This electronic component may perform its functions fully if the switching frequency is maintained at 1MHz.Ideally, the output voltage should not exceed 28V.It maintains a minimum voltage of 7V.
LP8555YFQR Features
Available in the 36-UFBGA, DSBGA package
Operating temperature of -40°C~85°C TA
Frequency of 500kHz 1MHz
Supply voltage of 3.6V
Switching frequency of 1MHz
LP8555YFQR Applications
There are a lot of Texas Instruments LP8555YFQR LED Driver ICs applications.
- Industrial LED Lighting: Image Recognition Devices
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- White LED Backlight for portable equipment
- Flicker-free LED Lighting using R1580N
- LED backlight driver for LCD displays for Tablets and Note PCs
- Down lighting
- LED Lighting PFCs, Linear Dimmable
- Portable lighting
- LED headlights
- Down lights
