LP8556SQ-E00/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Frequency | 312kHz 625kHz 1250kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LP8556 |
| Number of Outputs | 5 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 20V |
| Power Supplies | 12V |
| Number of Channels | 6 |
| Nominal Supply Current | 2.2mA |
| Quiescent Current | 2.2mA |
| Voltage - Output | 16V~34.5V |
| Topology | Step-Up (Boost) |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 25mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 48 |
| Switching Frequency | 1.25MHz |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP8556SQ-E00/NOPB Overview
Save board space with 24-WFQFN Exposed Pad package. This LED driver has 5 outputs.Surface Mount is used to mount the led light driver.It emerges as a DC DC Regulator with high efficiency.The LED driver is capable of operating at a temperature of -30°C~85°C TA.It is clear that Backlight will benefit from the program.Frequency 312kHz 625kHz 1250kHz is the basis of operation.In this case, it operates with terminations of 0.This LED driver is configured with a base of 24 pins.It is possible for undetermined failures to occur if the voltage supply falls below 2.7V.In total, it includes 48 segments.LED drivers can be found under the base part number LP8556.Its output voltage is 16V~34.5V.According to its characteristics, it is also categorized into Display Drivers.It is necessary to use 20V voltage to power systems.Having the switching frequency at 1.25MHz enables this electronic component to perform at its best.When no external factors are present, there is 2.2mA current consumption.A total of 6 channels are available for transmission.
LP8556SQ-E00/NOPB Features
Available in the 24-WFQFN Exposed Pad package
Operating temperature of -30°C~85°C TA
Frequency of 312kHz 625kHz 1250kHz
Supply voltage of 12V
Operating with the supply voltage of 20V
Switching frequency of 1.25MHz
LP8556SQ-E00/NOPB Applications
There are a lot of Texas Instruments LP8556SQ-E00/NOPB LED Driver ICs applications.
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Panel lighting
- LED headlights
- Street lighting
- Stage Lighting and Signage
- Linear fluorescent
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Amusement Machines
- Medical surgery lighting
- Dimmable LED for vehicle interiors
