LP8556SQE-E00/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Frequency | 312kHz 625kHz 1250kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LP8556 |
| Number of Outputs | 5 |
| Qualification Status | Not Qualified |
| Power Supplies | 12V |
| Number of Channels | 6 |
| Max Supply Voltage | 20V |
| Nominal Supply Current | 2.2mA |
| Quiescent Current | 2.2mA |
| Voltage - Output | 16V~34.5V |
| Topology | Step-Up (Boost) |
| Output Current per Channel | 25mA |
| Input Characteristics | STANDARD |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 48 |
| Switching Frequency | 1.25MHz |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP8556SQE-E00/NOPB Overview
It saves board space with the 24-WFQFN Exposed Pad package. 5 outputs are designed into LED drivers.It is possible to mount the led driver using Surface Mount.It is highly performing and reliable when it emerges as a DC DC Regulator.It is possible for the led light driver to operate at a temperature of -30°C~85°C TA.A number of benefits are available to Backlight.It operates at 312kHz 625kHz 1250kHz frequency.It operates using 24 terminations.In this LED driver, the base is configured as 24.There may be undetermined failures if the voltage supply falls below 2.7V.There are 48 segments.The mount is in the direction of Surface Mount.The LED driver is available under the part number LP8556.It is acceptable to supply voltages of 20V volts.The voltage output by it is 16V~34.5V.In addition, its characteristics are classified into Display Drivers.This electronic component may perform its functions fully if the switching frequency is maintained at 1.25MHz.There is no external factor that consumes current when there is 2.2mA current consumption.A total of 6 transmission channels are available.
LP8556SQE-E00/NOPB Features
Available in the 24-WFQFN Exposed Pad package
Operating temperature of -30°C~85°C TA
Frequency of 312kHz 625kHz 1250kHz
Supply voltage of 1.8V
Switching frequency of 1.25MHz
LP8556SQE-E00/NOPB Applications
There are a lot of Texas Instruments LP8556SQE-E00/NOPB LED Driver ICs applications.
- Stage and Studio lighting
- High-end retail lighting
- Constant Voltage Power Source for portable equipment
- Refrigeration lighting
- Industrial LED Lighting: Image Recognition Devices
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Replacement lamps
- Auxiliary lights for on-vehicle cameras
- LED Lighting PFCs, Linear Dimmable
- OLED power supply for portable equipment
