LP8556SQX-E00/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Frequency | 312kHz 625kHz 1250kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LP8556 |
| Number of Outputs | 5 |
| Qualification Status | Not Qualified |
| Power Supplies | 12V |
| Number of Channels | 6 |
| Max Supply Voltage | 20V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 2.2mA |
| Quiescent Current | 2.2mA |
| Voltage - Output | 16V~34.5V |
| Topology | Step-Up (Boost) |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 25mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 48 |
| Switching Frequency | 1.25MHz |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP8556SQX-E00/NOPB Overview
24-WFQFN Exposed Pad package saves space on the board. LED drivers have a total of 5 outputs that are used in the design of the drivers.The mounting method is Surface Mount.DC DC Regulator emerges with high efficiency and reliability.The LED driver has the capability of operating at a temperature of -30°C~85°C TA.It provides considerable benefits for Backlight.A frequency of 312kHz 625kHz 1250kHz is used to operate it.There are 24 terminations associated with it.The LED light driver has a base configuration of 24 pins.If the voltage supply is less than 2.7V, undetermined failures will occur.A total of 48 segments are estimated.It's mounted by Surface Mount.You can find this LED driver under the base part number LP8556.The voltage of 20V can be supplied.16V~34.5V is the output voltage.Furthermore, it can be classified as Display Drivers based on its characteristics.With a minimal supply voltage of 2.7V, it reaches the highest efficiency levels.The electronic component can function fully when the switching frequency is maintained at 1.25MHz.In the absence of external factors, 2.2mA current is consumed.A total of 6 channels are available for transmission.
LP8556SQX-E00/NOPB Features
Available in the 24-WFQFN Exposed Pad package
Operating temperature of -30°C~85°C TA
Frequency of 312kHz 625kHz 1250kHz
Supply voltage of 1.8V
Switching frequency of 1.25MHz
LP8556SQX-E00/NOPB Applications
There are a lot of Texas Instruments LP8556SQX-E00/NOPB LED Driver ICs applications.
- Linear fluorescent
- LED headlights
- LED Lighting PFCs, Linear Dimmable
- Stage Lighting and Signage
- Constant Voltage Power Source for portable equipment
- Replacement lamps
- OLED power supply for portable equipment
- General lighting
- LED backlight driver for LCD displays for portable equipment
- Down lighting
