LP8556SQX-E08/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 312kHz 625kHz 1250kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LP8556 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 20V |
| Power Supplies | 12V |
| Number of Channels | 6 |
| Nominal Supply Current | 2.2mA |
| Quiescent Current | 2.2mA |
| Voltage - Output | 16V~34.5V |
| Topology | Step-Up (Boost) |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 23mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 48 |
| Switching Frequency | 1.25MHz |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP8556SQX-E08/NOPB Overview
Save board space with 24-WFQFN Exposed Pad package. The LED driver's design uses 4 outputs.Surface Mount represents this mounting method.In this case, it emerges as a DC DC Regulator with a high efficiency.-30°C~85°C TA is the operating temperature and it works fine.It provides considerable benefits for Backlight.The frequency of 312kHz 625kHz 1250kHz is used as the basis for its operation.24 terminations are used in its operation.To form its configuration, there are 24 pins.There may be undetermined failures if the voltage supply falls below 2.7V.It consists of 48 segments.You can find this LED driver under the base part number LP8556.In this device, the output voltage is 16V~34.5V volts.In addition, it can also be categorized into Display Drivers based on its characteristics.Systems require 20V voltage to operate.Having the switching frequency at 1.25MHz enables this electronic component to perform at its best.No external factors result in 2.2mA current consumption.There are 6 transmission channels available.
LP8556SQX-E08/NOPB Features
Available in the 24-WFQFN Exposed Pad package
Operating temperature of -30°C~85°C TA
Frequency of 312kHz 625kHz 1250kHz
Supply voltage of 1.8V
Operating with the supply voltage of 20V
Switching frequency of 1.25MHz
LP8556SQX-E08/NOPB Applications
There are a lot of Texas Instruments LP8556SQX-E08/NOPB LED Driver ICs applications.
- Street lighting
- LED Lightings for Industrial Equipment
- Panel lighting
- White LED Backlight for portable equipment
- Linear fluorescent
- Constant Voltage Power Source for portable equipment
- Museum lighting
- Portable lighting
- LED headlights
- LED Lighting PFCs, Linear Dimmable
