LP8556TME-E06/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Frequency | 312kHz 625kHz 1250kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LP8556 |
| Number of Outputs | 5 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 20V |
| Power Supplies | 12V |
| Number of Channels | 6 |
| Max Supply Current | 3.65mA |
| Quiescent Current | 2.2mA |
| Voltage - Output | 16V~39V |
| Topology | Step-Up (Boost) |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 25mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 48 |
| Switching Frequency | 1.25MHz |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 675μm |
| Length | 0m |
| Width | 0m |
| Thickness | 420μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP8556TME-E06/NOPB Overview
The 20-WFBGA, DSBGA package conserves board space. LED drivers with this design have 5 outputs.In this case, mounting method is Surface Mount.In this case, the DC DC Regulator emerges as highly efficient and reliable.When the temperature is -30°C~85°C TA, it can work normally.There are considerable benefits for Backlight.It operates at 312kHz 625kHz 1250kHz frequency.It operates using 20 terminations.There are 20 pins on its base.Undetermined failures can occur if the voltage supply is below 2.7V.Based on our estimates, there are 48 segments.This LED driver can be found under the base part number LP8556.There is 16V~39V voltage output from it.Further, its characteristics allow it to be classified as Display Drivers.A minimal supply current is required in order for this device to provide high efficiency.Systems require 20V voltage to operate.Having the switching frequency at 1.25MHz enables this electronic component to perform at its best.No external factors result in 2.2mA current consumption.There are 6 transmission channels available.
LP8556TME-E06/NOPB Features
Available in the 20-WFBGA, DSBGA package
Operating temperature of -30°C~85°C TA
Frequency of 312kHz 625kHz 1250kHz
Supply voltage of 1.8V
Operating with the supply voltage of 20V
Switching frequency of 1.25MHz
LP8556TME-E06/NOPB Applications
There are a lot of Texas Instruments LP8556TME-E06/NOPB LED Driver ICs applications.
- White LED Backlight for portable equipment
- Refrigeration lighting
- High-end retail lighting
- General lighting
- A- lamps
- Auxiliary lights for on-vehicle cameras
- Linear fluorescent
- LED backlight driver for LCD displays for Tablets and Note PCs
- Street lighting
- Stage Lighting and Signage
