LP8556TME-E09/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.4mm |
| Frequency | 312kHz 625kHz 1250kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LP8556 |
| Number of Outputs | 6 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 20V |
| Power Supplies | 12V |
| Output Current | 220mA |
| Max Supply Current | 3.65mA |
| Quiescent Current | 2.2mA |
| Voltage - Output | 16V~34.5V |
| Topology | Step-Up (Boost) |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 25mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 48 |
| Switching Frequency | 1.25MHz |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 675μm |
| Length | 0m |
| Width | 0m |
| Thickness | 420μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP8556TME-E09/NOPB Overview
To save board space, it uses the 20-WFBGA, DSBGA package. In this LED driver, there are 6 outputs.Surface Mount is used for mounting.When it emerges as a DC DC Regulator, it shows high-performance and reliability.It is able to work normally at the operating temperature of -30°C~85°C TA.Backlight has many advantages.A frequency of 312kHz 625kHz 1250kHz is used to operate it.For its operation, terminations with a value of 0 are used.To form its configuration, 20 pins are used.If the voltage supply is lower than 2.7V, undetermined failures may occur.It is estimated that there are 48 segments.LP8556 is the base part number for the LED driver.This device has an output voltage of 16V~34.5V volts.In addition, it can also be categorized into Display Drivers based on its characteristics.As long as the maximum supply current is less than 3.65mA, this device is capable of providing high efficiency.In this case, the load can only be supplied with 220mA current.Systems require 20V voltage to operate.This electronic component can fully perform its functions when the switching frequency is kept at 1.25MHz.In the absence of external factors, 2.2mA current is consumed.
LP8556TME-E09/NOPB Features
Available in the 20-WFBGA, DSBGA package
Operating temperature of -30°C~85°C TA
Frequency of 312kHz 625kHz 1250kHz
Supply voltage of 12V
Operating with the supply voltage of 20V
Switching frequency of 1.25MHz
LP8556TME-E09/NOPB Applications
There are a lot of Texas Instruments LP8556TME-E09/NOPB LED Driver ICs applications.
- Down lights
- Constant Voltage Power Source for portable equipment
- Industrial LED Lighting: Image Recognition Devices
- Portable lighting
- Street lighting
- Stage Lighting and Signage
- General lighting
- Down lighting
- Museum lighting
- Stage and Studio lighting
