LP8556TME-E11/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFBGA, DSBGA |
| Number of Pins | 20 |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.4mm |
| Frequency | 312kHz 625kHz 1250kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LP8556 |
| Number of Outputs | 3 |
| Qualification Status | Not Qualified |
| Max Output Current | 25mA |
| Number of Channels | 6 |
| Quiescent Current | 2.2mA |
| Max Output Voltage | 21V |
| Voltage - Output | 7V~21V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 20V |
| Min Output Voltage | 7V |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 23mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 12 |
| Switching Frequency | 1.25MHz |
| Multiplexed Display Capability | NO |
| Nominal Input Voltage (DC) | 12V |
| Height | 675μm |
| Length | 0m |
| Width | 0m |
| Thickness | 420μm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LP8556TME-E11/NOPB Overview
Its 20-WFBGA, DSBGA package is used to save board space. There are 3 outputs used for the design of this LED drivers.To mount, use Surface Mount.The system emerges as a DC DC Regulator with high efficiency.The led light driver operates normally at -30°C~85°C TA. Taking advantage of Backlight has considerable benefits.Frequency 312kHz 625kHz 1250kHz is the basis of operation.20 terminations are used in its operation.This configuration is built upon 20 pins.A total of 12 segments are estimated.It's mounted by Surface Mount.This LED driver has the part number LP8556.The voltage at the output terminal is 7V~21V.In addition, its characteristics are classified into Display Drivers.With 2.7V as the minimal input voltage, it operates.20V is the maximum value of supply current that can be used.Having the switching frequency at 1.25MHz enables this electronic component to perform at its best.Even when operating at a maximal output current of 25mA, it is capable of delivering all the benefits of a LED driver.There is no external factor that can consume current, so 2.2mA current is consumed.It is important that the output voltage does not exceed 21V.The voltage it outputs stays at 7V.Currently, there are 6 channels available for transmission.
LP8556TME-E11/NOPB Features
Available in the 20-WFBGA, DSBGA package
Operating temperature of -30°C~85°C TA
Frequency of 312kHz 625kHz 1250kHz
Supply voltage of 12V
Switching frequency of 1.25MHz
LP8556TME-E11/NOPB Applications
There are a lot of Texas Instruments LP8556TME-E11/NOPB LED Driver ICs applications.
- General lighting
- Museum lighting
- Stage Lighting and Signage
- Other Electronic Devices
- White LED Backlight for portable equipment
- LED Lightings for Industrial Equipment
- Linear fluorescent
- OLED power supply for portable equipment
- LED Lightings for Inspection Devices
- High-end retail lighting
