LP8556TMX-E03/NOPB
| Parameters | |
|---|---|
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Frequency | 312kHz 625kHz 1250kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LP8556 |
| Number of Outputs | 5 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 20V |
| Power Supplies | 12V |
| Number of Channels | 6 |
| Quiescent Current | 2.2mA |
| Voltage - Output | 16V~34.5V |
| Topology | Step-Up (Boost) |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 20mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 12 |
| Switching Frequency | 1.25MHz |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 675μm |
| Length | 0m |
| Width | 0m |
| Thickness | 420μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 20 |
LP8556TMX-E03/NOPB Overview
Additionally, there is a 20-WFBGA, DSBGA package for saving space.LED drivers design with 5 outputs.We are using Surface Mount as the mounting method.As a result, it appears as a DC DC Regulator with a high efficiency and a high degree of reliability.The led light driver is capable of operating at the operating temperature of -30°C~85°C TA.A number of benefits are available to Backlight.In this case, the frequency is 312kHz 625kHz 1250kHz.In this case, it uses 20 terminations.This configuration is built upon 20 pins.A voltage supply less than 2.7V will cause undetermined failures.We estimate that there are 12 segments.It is under the base part number LP8556 that the LED driver can be found.Its output voltage is 16V~34.5V.The Display Drivers is also assigned based on its characteristics.It is necessary to use 20V voltage to power systems.When the switching frequency is maintained at 1.25MHz, this electronic component is able to fully play its functions.In the absence of external factors, there is 2.2mA consumption of current.There are currently 6 channels available for transmission.
LP8556TMX-E03/NOPB Features
Available in the 20-WFBGA, DSBGA package
Operating temperature of -30°C~85°C TA
Frequency of 312kHz 625kHz 1250kHz
Supply voltage of 1.8V
Operating with the supply voltage of 20V
Switching frequency of 1.25MHz
LP8556TMX-E03/NOPB Applications
There are a lot of Texas Instruments LP8556TMX-E03/NOPB LED Driver ICs applications.
- Gallery lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Stage and Studio lighting
- OLED power supply for portable equipment
- Other Electronic Devices
- Linear fluorescent
- Panel lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Refrigeration lighting
- Architectural lighting
