LP8860AQVFPRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-PowerLQFP |
| Number of Pins | 32 |
| Weight | 178.601996mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Automotive, Backlight, Lighting |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100kHz~2.2MHz |
| Base Part Number | LP8860 |
| Number of Outputs | 4 |
| Max Output Current | 150mA |
| Max Supply Voltage | 48V |
| Output Current | 150mA |
| Max Supply Current | 15mA |
| Quiescent Current | 2.5mA |
| Max Output Voltage | 40V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 150mA |
| Min Output Voltage | 16V |
| Internal Switch(s) | No |
| Dimming | PWM |
| Number of Segments | 8 |
| Switching Frequency | 2.2MHz |
| Voltage - Supply (Min) | 3V |
| Multiplexed Display Capability | NO |
| Nominal Input Voltage (DC) | 3.3V |
| Height | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LP8860AQVFPRQ1 Overview
The 32-PowerLQFP package is used for saving board space. LED drivers are designed with 4 outputs.The led driver mounting is done by using Surface Mount.With high efficiency, it appears as a DC DC Controller.It is possible for the led driver ic to function normally at -40°C~125°C TA.There are considerable benefits for Automotive, Backlight, Lighting.100kHz~2.2MHz is the frequency in which it operates.32 terminations are designed for its operation.With 32 pins at the base, this LED driver has a base configuration.A voltage supply less than 3V could result in undetermined failures.The number of segments is estimated to be 8.There is a device mounted on the Surface Mount.It is under the base part number LP8860 that you can find this LED driver.The voltage of 48V can be supplied.Initially, it accepts a voltage of 3V.5.5V is the maximum value of supply current that can be used.This device is able to provide high efficiency when the maximal supply current should be less than 15mA.150mA is the maximum current the load can handle.This electronic component may perform its functions fully if the switching frequency is maintained at 2.2MHz.When operating with a 150mA output current, the LED driver delivers all the benefits.There are many applications for this LED driver belonging to the Automotive, AEC-Q100 series.In the absence of external factors, 2.5mA current is consumed.It is important to keep the output voltage below 40V.The voltage it outputs stays at 16V.
LP8860AQVFPRQ1 Features
Available in the 32-PowerLQFP package
Operating temperature of -40°C~125°C TA
Frequency of 100kHz~2.2MHz
Supply voltage of 3.3V
Switching frequency of 2.2MHz
LP8860AQVFPRQ1 Applications
There are a lot of Texas Instruments LP8860AQVFPRQ1 LED Driver ICs applications.
- Medical surgery lighting
- Down lights
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Auxiliary lights for on-vehicle cameras
- LED backlight driver for LCD displays for Tablets and Note PCs
- A- lamps
- Architectural lighting
- Linear fluorescent
- Dimmable LED for vehicle interiors
- Gallery lighting
