LPC11U68JBD100E
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LPC11U |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.4V |
| Oscillator Type | Internal |
| Number of I/O | 80 |
| Speed | 50MHz |
| RAM Size | 36K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.4V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Clock Frequency | 25MHz |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, Microwire, SPI, SSI, SSP, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 12x12b |
| Has ADC | YES |
| DMA Channels | YES |
| PWM Channels | YES |
| DAC Channels | NO |
| ROM (words) | 262144 |
| EEPROM Size | 4K x 8 |
| On Chip Program ROM Width | 8 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2010 |
| Series | LPC11Uxx |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Technology | CMOS |
| Terminal Position | QUAD |
LPC11U68JBD100E Description
The LPC11U6x are an ARM Cortex-M0+ based, low-cost 32-bit MCU family operating at CPU frequencies of up to 50 MHz. The LPC11U6x support up to 256 KB of flash memory, a 4 KB EEPROM, and 36 KB of SRAM.The ARM Cortex-M0+ is an easy-to-use, energy-efficient core using a two-stage pipeline and fast single-cycle I/O access.The peripheral complement of the LPC11U6x includes a DMA controller, a CRC engine,one full-speed USB device controller with XTAL-less low-speed mode, two I2C-bus interfaces, up to five USARTs, two SSP interfaces, PWM/timer subsystem with six configurable multi-purpose timers, a Real-Time Clock, one 12-bit ADC, temperature sensor, function-configurable I/O ports, and up to 80 general-purpose I/O pins.
LPC11U68JBD100E Applications
Three-phase e-meter n
Car radio
GPS tracker n
Medical monitor
Gaming accessories n
PC peripherals
LPC11U68JBD100E Features
System:
ARM Cortex-M0+ processor (version r0p1), running at frequencies of up to 50 MHz
with single-cycle multiplier and fast single-cycle I/O port.
ARM Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC).
AHB Multilayer matrix.
System tick timer.
Serial Wire Debug (SWD) and JTAG boundary scan modes supported.
Micro Trace Buffer (MTB) supported.
Memory:
Up to 256 KB on-chip flash programming memory with page erase.
Up to 32 KB main SRAM.
Up to two additional SRAM blocks of 2 KB each.
Up to 4 KB EEPROM.
ROM API support:
Boot loader.
USART drivers.
I2C drivers.
USB drivers.
DMA drivers.
