LPC2366FBD100,551
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2003 |
| Series | LPC2300 |
| JESD-609 Code | e3 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LPC2366 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Oscillator Type | Internal |
| Number of I/O | 70 |
| Speed | 72MHz |
| RAM Size | 58K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM7® |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Clock Frequency | 25MHz |
| Program Memory Type | FLASH |
| Core Size | 16/32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | CANbus, Ethernet, I2C, Microwire, SPI, SSI, SSP, UART/USART, USB |
| Supply Current-Max | 100mA |
| Bit Size | 32 |
| Data Converter | A/D 6x10b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | YES |
| PWM Channels | YES |
| DAC Channels | YES |
| ROM (words) | 262144 |
| External Data Bus Width | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | ROHS3 Compliant |
LPC2366FBD100,551 Description
The LPC2366FBD100,551 Microcontroller is based on a 16-bit/32-bit ARM7TDMI-S CPU with real-time emulation that combines the microcontroller with up to 512 kB of embedded high-speed flash memory.
LPC2366FBD100,551 Features
ARM7TDMI-S processor, running at up to 72 MHz
Up to 512 kB on-chip flash program memory with In-System Programming (ISP) and In-Application Programming (IAP) capabilities. Flash program memory is on the ARM local bus for high-performance CPU access.
8 kB/32 kB of SRAM on the ARM local bus for high-performance CPU access.
16 kB SRAM for Ethernet interface. Can also be used as general purpose SRAM.
8 kB SRAM for general purpose DMA use also accessible by the USB
Advanced Vectored Interrupt Controller (VIC), supporting up to 32 vectored interrupts
Standard ARM test/debug interface for compatibility with existing tools.
The emulation trace module supports real-time trace.
Single 3.3 V power supply (3.0 V to 3.6 V).
Four reduced power modes: idle, sleep, power-down, and deep power-down.
Four external interrupt inputs are configurable as edge/level sensitive. All pins on Port 0 and Port 2 can be used as edge-sensitive interrupt sources.
Each peripheral has its own clock divider for further power saving.
Brownout detects with separate thresholds for interrupt and forced reset.
On-chip power-on reset.
On-chip crystal oscillator with an operating range of 1 MHz to 24 MHz.
LPC2366FBD100,551 Applications
Industrial control
Medical systems
Protocol converter
Communications
