Parameters | |
---|---|
Factory Lead Time | 1 Week |
Mounting Type | Surface Mount |
Package / Case | 100-LQFP |
Surface Mount | YES |
Operating Temperature | -40°C~85°C TA |
Packaging | Tray |
Published | 2003 |
Series | LPC2300 |
JESD-609 Code | e3 |
Part Status | Discontinued |
Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
Number of Terminations | 100 |
ECCN Code | EAR99 |
Terminal Finish | Tin (Sn) |
HTS Code | 8542.31.00.01 |
Subcategory | Microcontrollers |
Technology | CMOS |
Terminal Position | QUAD |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Supply Voltage | 3.3V |
Terminal Pitch | 0.5mm |
Time@Peak Reflow Temperature-Max (s) | 40 |
Base Part Number | LPC2368 |
Pin Count | 100 |
JESD-30 Code | S-PQFP-G100 |
Qualification Status | Not Qualified |
Supply Voltage-Max (Vsup) | 3.6V |
Power Supplies | 3.3V |
Supply Voltage-Min (Vsup) | 3V |
Oscillator Type | Internal |
Number of I/O | 70 |
Speed | 72MHz |
RAM Size | 58K x 8 |
Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
Core Processor | ARM7® |
Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
Clock Frequency | 25MHz |
Program Memory Type | FLASH |
Core Size | 16/32-Bit |
Program Memory Size | 512KB 512K x 8 |
Connectivity | CANbus, Ethernet, I2C, Microwire, Memory Card, SPI, SSI, SSP, UART/USART, USB |
Supply Current-Max | 100mA |
Bit Size | 32 |
Data Converter | A/D 6x10b; D/A 1x10b |
Has ADC | YES |
DMA Channels | YES |
PWM Channels | YES |
DAC Channels | YES |
ROM (words) | 524288 |
External Data Bus Width | 16 |
Height Seated (Max) | 1.6mm |
Length | 14mm |
Width | 14mm |
RoHS Status | ROHS3 Compliant |
The LPC2368FBD100,551 microcontroller is based on a 16-bit/32-bit ARM7TDMI-S CPU with real-time emulation that combines the microcontroller with up to 512 kB of embedded high-speed flash memory.
ARM7TDMI-S processor, running at up to 72 MHz
Up to 512 kB on-chip flash program memory with In-System Programming (ISP) and In-Application Programming (IAP) capabilities. Flash program memory is on the ARM local bus for high-performance CPU access.
8 kB/32 kB of SRAM on the ARM local bus for high-performance CPU access.
16 kB SRAM for Ethernet interface. Can also be used as general purpose SRAM.
8 kB SRAM for general purpose DMA use is also accessible by the USB.
Dual Advanced High-performance Bus (AHB) system that provides for simultaneous Ethernet DMA, USB DMA, and program execution from on-chip flash with no contention between those functions. A bus bridge allows the Ethernet DMA to access the other AHB subsystem.
Advanced Vectored Interrupt Controller (VIC), supporting up to 32 vectored interrupts.
General Purpose DMA controller (GPDMA) on AHB that can be used with the SSP serial interfaces, the I2S port, and the Secure Digital/MultiMediaCard (SD/MMC) card port, as well as for memory-to-memory transfers.
Standard ARM test/debug interface for compatibility with existing tools.
The emulation trace module supports real-time trace.
Single 3.3 V power supply (3.0 V to 3.6 V).
Four reduced power modes: idle, sleep, power-down, and deep power-down.
Four external interrupt inputs are configurable as edge/level sensitive. All pins on Port 0 and Port 2 can be used as edge-sensitive interrupt sources.
Processor wake-up from Power-down mode via any interrupt able to operate during Power-down mode (includes external interrupts, RTC interrupt, USB activity, Ethernet wake-up interrupt).
Two independent power domains allow fine tuning of power consumption based on needed features.
Each peripheral has its own clock divider for further power saving.
Brownout detects with separate thresholds for interrupt and forced reset.
On-chip power-on reset.
On-chip crystal oscillator with an operating range of 1 MHz to 24 MHz
Industrial control
Medical systems
Protocol converter
Communications