LPTM10-12107-3FTG208C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 208-LBGA |
| Number of Pins | 208 |
| Packaging | Tray |
| Published | 2000 |
| Series | Platform Manager™ |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Applications | General Purpose |
| Additional Feature | HTTP://WWW.LATTICESEMI.COM/LIT/DOCS/PACKAGE/PKG.PDF |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 3.3V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LPTM10-12 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.96V |
| Power Supplies | 2.5/53/3.6V |
| Temperature Grade | OTHER |
| Supply Voltage-Min (Vsup) | 2.8V |
| Number of Channels | 12 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 12μA |
| Supply Current-Max (Isup) | 40mA |
| Height Seated (Max) | 1.55mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | ROHS3 Compliant |
LPTM10-12107-3FTG208C Overview
Tray is acceptable as a shipping the power management method.A convenient transport package is provided in 208-LBGA .For easy adaptability, Surface Mount provides a universal mounting method.There are a number of applications targeted at General Purpose .As a result, this power management is powered by 3.3V voltage.Check out search LPTM10-12 for more power ic's pin-to-pin solutions.The power management has 208 terminals.As an analog IC with a ANALOG CIRCUIT value, the instruments designs has been widely praised.A power managment ic with 208 pins is available.A Surface Mount allows mounting on a PCB or other board.When powered by 3.3V voltage, the power manager is capable of performing a wide range of demanding tasks.Its pinout begins at 208 pins.An input voltage of 12μA is required for this power management ic to operate.In the Power Management Circuits series, it is included.In order for the ic supplies to begin working, it must have at least 2.8V .12 channels cooperate together to maintain the output quality.In addition, you should not supply the power supply ic with a voltage greater than 3.96V .It is enough to run the power management chip with 2.5/53/3.6V power supplies.Platform Manager? can be used to search for similar manage icss.With this integrated power supplies, it is possible to find HTTP://WWW.LATTICESEMI.COM/LIT/DOCS/PACKAGE/PKG.PDF as well.The temperature should not exceed 70°C .It cannot be used at a temperature below 0°C .
LPTM10-12107-3FTG208C Features
Mainly used in General Purpose applications
ANALOG CIRCUIT analog IC
HTTP://WWW.LATTICESEMI.COM/LIT/DOCS/PACKAGE/PKG.PDF
LPTM10-12107-3FTG208C Applications
There are a lot of Lattice Semiconductor Corporation LPTM10-12107-3FTG208CPower Management applications.
- DSP
- System Health Monitoring
- Projection Mapping
- Netbooks
- Supplement In-Circuit Tester (ICT) Access
- Switches
- Production Test
- SSTL-2 Termination
- DDR Termination Voltage WHITE SPACE
- Automotive camera module
