LPV321DBVR
| Parameters | |
|---|---|
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LPV321 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 9μA |
| Nominal Supply Current | 12mA |
| Slew Rate | 0.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 2nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5V |
| Output Current per Channel | 72mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 237 kHz |
| Unity Gain BW-Nom | 237 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.06μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1.5mV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Power | NO |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
LPV321DBVR Overview
The linear amplifier is packaged in a SC-74A, SOT-753 case which makes it easy for the consumer to handle. Op amps are General Purpose types of amplifier on the chip. The op amp is delivered to you in a Tape & Reel (TR) case. There have been a total of 5 terminations over the past year. Buffer amplifier has a total of 5 pins on it. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 5 pins are included on the operational amplifiers. In terms of the input offset voltage, instrumentation amplifier rates at 7mV. This electronic part is recommended for mounting type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~85°C. As long as the supply current of the chip does not exceed 9μA, this op amp ic can operate. It is a member of the 100dB's 100dB family. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. The linear amplifier is packaged by using a TAPE AND REEL axis.
LPV321DBVR Features
5 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
LPV321DBVR Applications
There are a lot of Texas Instruments LPV321DBVR Instrumentational OP Amps applications.
- Communication
- PDA
- Weak signal detection
- Biopotential
- Voltage regulation circuit
- Mobile phone
- Medical imaging
- Exponential operation circuits
- Image computer boards
- Blood pressure sensors
