LPV324MT/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | LPV324 |
| Pin Count | 14 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Elements | 4 |
| Power Supplies | 2.7/5V |
| Operating Supply Current | 28μA |
| Nominal Supply Current | 28μA |
| Output Current | 2mA |
| Slew Rate | 0.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 2nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5V |
| Output Current per Channel | 16mA |
| Input Offset Voltage (Vos) | 7mV |
| Gain Bandwidth Product | 152kHz |
| Unity Gain BW-Nom | 152 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.06μA |
| Power Supply Rejection Ratio (PSRR) | 50dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 1.5mV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.05μA |
| Programmable Power | NO |
| Wideband | NO |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LPV324MT/NOPB Overview
Packaged in a 14-TSSOP (0.173, 4.40mm Width) case, the buffer op amp is ready to use. A General Purpose-type buffer amplifier is shown here. Instrumentation amplifier is delivered in a Tube case. During the past two weeks, there have been close to 14 terminations. The total number of pins on linear amplifier is 14. Please take in mind that this instrumentation amplifier should be run at 5V. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. A total of 14 pins are present on the instrumentation amplifier. In terms of input offset voltage, operational amplifier rates 7mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 28μA . The voltage gain should stay at 100dB. On the output type, there are Rail-to-Rail different types of op amps. 4 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3V.
LPV324MT/NOPB Features
14 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
LPV324MT/NOPB Applications
There are a lot of Texas Instruments LPV324MT/NOPB Instrumentational OP Amps applications.
- Navigation
- RF cable systems
- Image computer boards
- Semiconductor detectors
- Scintillation detectors
- Home audio systems
- Multimedia playback equipment
- Addition operation circuits
- Multiplication circuits
- Professional videography
