banner_page

LPV324MTX/NOPB

4 Channels 16mA per Channel 2nA 50 dB Instrumentational OP Amps 0.06μA 3V 2.7V~5V LPV324 14 Pins 14-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LPV324MTX/NOPB
  • Package: 14-TSSOP (0.173, 4.40mm Width)
  • Datasheet: -
  • Stock: 636
  • Description: 4 Channels 16mA per Channel 2nA 50 dB Instrumentational OP Amps 0.06μA 3V 2.7V~5V LPV324 14 Pins 14-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 14-TSSOP (0.173, 4.40mm Width)
Number of Pins 14
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 14
ECCN Code EAR99
Subcategory Operational Amplifier
Packing Method TR
Technology BICMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Base Part Number LPV324
Pin Count 14
Output Type Rail-to-Rail
Operating Supply Voltage 3V
Power Supplies 2.7/5V
Number of Channels 4
Operating Supply Current 28μA
Nominal Supply Current 28μA
Output Current 2mA
Slew Rate 0.1V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 50 dB
Current - Input Bias 2nA
Voltage - Supply, Single/Dual (±) 2.7V~5V
Output Current per Channel 16mA
Input Offset Voltage (Vos) 7mV
Bandwidth 152 kHz
Unity Gain BW-Nom 152 kHz
Voltage Gain 100dB
Average Bias Current-Max (IIB) 0.06μA
Power Supply Rejection Ratio (PSRR) 50dB
Low-Offset NO
Frequency Compensation YES
Supply Voltage Limit-Max 5.5V
Voltage - Input Offset 1.5mV
Low-Bias NO
Micropower YES
Bias Current-Max (IIB) @25C 0.05μA
Programmable Power NO
Height 1.2mm
Length 5mm
Width 4.4mm
Thickness 1mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LPV324MTX/NOPB Overview


In order to protect the op amps, a 14-TSSOP (0.173, 4.40mm Width) case is used. A General Purpose-type buffer amplifier is shown here. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations is approaching the 14 mark. Linear amplifier has a total of 14 pins. Please take in mind that op amp should be run at 5V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 14 pins are included on the operational amplifiers. Op amp rates 7mV as input offset voltage. Surface Mount is the recommended mounting type of operational amplifiers. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~85°C . It is possible to operate this buffer amplifier from a supply current of 28μA . The voltage gain should stay at 100dB. On the buffer amps, there are 4 channels that can be used. On the output type, there are Rail-to-Rail different types of op amps. The operating supply voltage of the buffer op amp is rated at 3V. The instrumentation amplifier is packed in the form of TR.

LPV324MTX/NOPB Features


14 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail

LPV324MTX/NOPB Applications


There are a lot of Texas Instruments LPV324MTX/NOPB Instrumentational OP Amps applications.

  • Displayers for aircraft and air transportation control systems
  • Semiconductor detectors
  • Cinema or auditorium audio system
  • Measurements of Wheatstone bridge
  • Medical instruments
  • Oscilloscopes
  • Home audio systems
  • Image computer boards
  • Computer workstations
  • Band-stop filter

Write a review

Note: HTML is not translated!
    Bad           Good