LPV358IDGKR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LPV358 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 3V |
| Number of Elements | 2 |
| Operating Supply Current | 15μA |
| Nominal Supply Current | 20mA |
| Slew Rate | 0.1V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 50 dB |
| Current - Input Bias | 2nA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5V |
| Output Current per Channel | 72mA |
| Input Offset Voltage (Vos) | 7mV |
| Bandwidth | 237 kHz |
| Unity Gain BW-Nom | 237 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.065μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 5.5V |
| Voltage - Input Offset | 1.5mV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.05μA |
| Programmable Power | NO |
| Power | NO |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
LPV358IDGKR Overview
The linear amplifier is packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. An op amp ic of the General Purpose type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. In this case, there are 8 pins on the board. This linear amplifier should be powered by an 5V battery. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 8 pins are available on the instrumentation amplifier. The input offset voltage is 7mV. This electronic part is best mounted with type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . As long as the supply current of the chip does not exceed 15μA, this op amp ic can operate. The voltage gain should stay at 100dB. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. Op amp has total of 2 elements. The operating supply voltage of the buffer op amp is rated at 3V. The instrumentation amplifier is packed in the form of TAPE AND REEL.
LPV358IDGKR Features
8 Pins
supply voltage of 5V
100dB voltage gain
Output Type: Rail-to-Rail
LPV358IDGKR Applications
There are a lot of Texas Instruments LPV358IDGKR Instrumentational OP Amps applications.
- RF cable systems
- Weak signal detection
- Power generator
- Band-pass filter
- High input resistance broadband
- Mobile phone
- Power transmission
- E-book readers
- High speed sample
- Blood pressure sensors
