banner_page

LPV511MG/NOPB

1 Channels 320pA 80 dB Instrumentational OP Amps 2.7V~12V LPV511 5 Pins 5-TSSOP, SC-70-5, SOT-353


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-LPV511MG/NOPB
  • Package: 5-TSSOP, SC-70-5, SOT-353
  • Datasheet: -
  • Stock: 318
  • Description: 1 Channels 320pA 80 dB Instrumentational OP Amps 2.7V~12V LPV511 5 Pins 5-TSSOP, SC-70-5, SOT-353(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 5-TSSOP, SC-70-5, SOT-353
Number of Pins 5
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Subcategory Operational Amplifier
Packing Method TR
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3V
Base Part Number LPV511
Pin Count 5
Output Type Rail-to-Rail
Number of Channels 1
Nominal Supply Current 880nA
Output Current 1.35mA
Current - Supply 1.2μA
Slew Rate 0.0077V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 80 dB
Current - Input Bias 320pA
Voltage - Supply, Single/Dual (±) 2.7V~12V
Input Offset Voltage (Vos) 3mV
Bandwidth 27 kHz
Gain Bandwidth Product 25kHz
Unity Gain BW-Nom 27 kHz
Voltage Gain 110dB
Power Supply Rejection Ratio (PSRR) 84dB
Low-Offset NO
Frequency Compensation NO
Voltage - Input Offset 200μV
Current - Output / Channel 1.3mA
Low-Bias YES
Micropower YES
Programmable Power NO
Height 1.1mm
Length 2mm
Width 1.25mm
Thickness 900μm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

LPV511MG/NOPB Overview


It is packaged in an 5-TSSOP, SC-70-5, SOT-353-case that protects the operational amplifiers from damage. This is a General Purpose type op amp. It comes in a Tape & Reel (TR) case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 5. In this case, there are 5 pins on the board. This linear amplifier should be powered by an 3V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. 5 pins are included on the operational amplifiers. The input offset voltage is 3mV. Surface Mount is the recommended mounting type of operational amplifiers. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureThere should be no change in the voltage gain. Buffer op amp is equipped with 1 channels on the device. On the output type, there are Rail-to-Rail different types of op amps. This linear amplifier pack is based on the TR axis. To run supply current of buffer amplifier under 1.2μA.

LPV511MG/NOPB Features


5 Pins
supply voltage of 3V
110dB voltage gain
Output Type: Rail-to-Rail

LPV511MG/NOPB Applications


There are a lot of Texas Instruments LPV511MG/NOPB Instrumentational OP Amps applications.

  • Active probe
  • Polarized electrodes
  • Subtraction operation circuits
  • Gaming industry
  • Radiation thermometry transducers
  • Fission chambers
  • Thermocouples
  • Professional videography
  • Industrial applications including automation
  • Multiplication circuits

Write a review

Note: HTML is not translated!
    Bad           Good