LPV511MGX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | LPV511 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Operating Supply Current | 1.2μA |
| Nominal Supply Current | 880nA |
| Output Current | 1.35mA |
| Slew Rate | 0.0077V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 80 dB |
| Current - Input Bias | 320pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~12V |
| Output Current per Channel | 1.3mA |
| Input Offset Voltage (Vos) | 3mV |
| Gain Bandwidth Product | 25kHz |
| Unity Gain BW-Nom | 27 kHz |
| Voltage Gain | 110dB |
| Power Supply Rejection Ratio (PSRR) | 84dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 200μV |
| Low-Bias | YES |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.0008μA |
| Programmable Power | NO |
| Wideband | NO |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LPV511MGX/NOPB Overview
It is packaged in an 5-TSSOP, SC-70-5, SOT-353-case that protects the operational amplifiers from damage. The instrumentation amplifier in this picture is of the General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. The number of terminations is approaching the 5 mark. It consists of a total of 5 pins in total. It is important to remember that this op amp should be operated at a voltage of 3V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. An 5-pin op amp ic is included in the package. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. This electronic part is recommended for mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. This op amp can operate from a supply current at 1.2μA. Maintain 110dB as the voltage gain. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 1. For packing the buffer amplifier, the TR-axis is adopted.
LPV511MGX/NOPB Features
5 Pins
supply voltage of 3V
110dB voltage gain
Output Type: Rail-to-Rail
LPV511MGX/NOPB Applications
There are a lot of Texas Instruments LPV511MGX/NOPB Instrumentational OP Amps applications.
- Wireless base stations
- Automation control systems
- Video computer boards
- Medical imaging
- single/dual op amp sum and difference circuits
- Signal filtering
- Test and measurement instruments
- Proportional counter tubes
- Portable electronic products powered by batteries
- Mobile phone
