LPV521MGE/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | LPV521 |
| Pin Count | 5 |
| Number of Channels | 1 |
| Operating Supply Current | 475nA |
| Nominal Supply Current | 475nA |
| Output Current | 23mA |
| Slew Rate | 0.0027V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 75 dB |
| Current - Input Bias | 0.04pA |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Output Current per Channel | 23mA |
| Input Offset Voltage (Vos) | 1mV |
| Bandwidth | 6.2 kHz |
| Unity Gain BW-Nom | 6.2 kHz |
| Voltage Gain | 132dB |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 100μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LPV521MGE/NOPB Overview
The linear amplifier is packaged in a 5-TSSOP, SC-70-5, SOT-353 case which makes it easy for the consumer to handle. An op amp ic of the General Purpose type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. A total of 5 terminations have been reported in the past few weeks. There are a total of 5 pins on this op amp. Please take in mind that this instrumentation amplifier should be run at 1.8V. Instrumentation amplifier is a part of Operational Amplifier. 5 pins are included on the operational amplifiers. There is an input offset voltage of 1mV for this buffer op amp. This electronic component is recommended to be mounted using the mounting type Surface Mount. Regarding the operating temperature of this device, instrumentation amplifier performs well at a temperature of -40°C~125°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 475nA and 10 . The voltage gain should stay at 132dB. 1 channels are available on the instrumentation amplifier. For the packing of the instrumentation amplifier, TR is adopted.
LPV521MGE/NOPB Features
5 Pins
supply voltage of 1.8V
132dB voltage gain
LPV521MGE/NOPB Applications
There are a lot of Texas Instruments LPV521MGE/NOPB Instrumentational OP Amps applications.
- Car stereo
- Multimedia playback equipment
- Computer workstations
- Tablets
- High input resistance broadband
- Oscilloscopes
- pH (acidity)
- Vehicle electronics
- Multiplication circuits
- Wireless base stations
