LPV531MKX/NOPB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TR |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | LPV531 |
| Pin Count | 6 |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Operating Supply Current | 425μA |
| Nominal Supply Current | 425μA |
| Output Current | 24mA |
| Slew Rate | 2.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 72 dB |
| Current - Input Bias | 0.05pA |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 24mA |
| Input Offset Voltage (Vos) | 4.5mV |
| Gain Bandwidth Product | 4.6MHz |
| Unity Gain BW-Nom | 4600 kHz |
| Voltage Gain | 128dB |
| Power Supply Rejection Ratio (PSRR) | 74dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Voltage - Input Offset | 1mV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | YES |
| Wideband | NO |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 870μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LPV531MKX/NOPB Overview
There is a SOT-23-6 Thin, TSOT-23-6 case package that contains the instrumentation amplifiers. Op amps are General Purpose types of amplifier on the chip. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. During the past two weeks, there have been close to 6 terminations. Buffer amplifier has a total of 6 pins on it. This linear amplifier should be powered by an 5V battery. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 6 pins are located on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 4.5mV. This electronic part is best mounted with type Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~85°C . Operational amplifier can operate supply current at 425μA. Voltage gain should remain at 128dB. In addition to outputting Rail-to-Rail signals, this op amp ic offers a number of other advantages. The linear amplifier consists of 1 different elements in total. The linear amplifier is packaged by using a TR axis.
LPV531MKX/NOPB Features
6 Pins
supply voltage of 5V
128dB voltage gain
Output Type: Rail-to-Rail
LPV531MKX/NOPB Applications
There are a lot of Texas Instruments LPV531MKX/NOPB Instrumentational OP Amps applications.
- Video amplifiers
- Micro signal measurement
- Television broadcasting equipment
- Thermocouples
- Fast A/D and D/A converters
- Polarized electrodes
- earphone
- MP3
- Exponential operation circuits
- Digital cameras
