LPV7215MF/NOPB
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Packing Method | TR |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | LPV7215 |
| Pin Count | 5 |
| Output Type | MOS, Push-Pull, Rail-to-Rail |
| Number of Elements | 1 |
| Nominal Supply Current | 1.03μA |
| Output Current | 19mA |
| Max Supply Current | 1.03μA |
| Propagation Delay | 30 μs |
| Quiescent Current | 750nA |
| Response Time | 15000 ns |
| Common Mode Rejection Ratio | 98 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 3mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 82dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 400 fA |
| Dual Supply Voltage | 5.5V |
| Input Bias Current | 400 fA |
| Current - Quiescent (Max) | 750nA |
| Voltage - Input Offset (Max) | 3mV @ 5V |
| Current - Input Bias (Max) | 0.4pA @ 5V |
| CMRR, PSRR (Typ) | 98dB CMRR, 82dB PSRR |
| Current - Output (Typ) | 19mA @ 5V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
LPV7215MF/NOPB Overview
The product is packaged in SC-74A, SOT-753 to facilitate transportation.There is a MOS, Push-Pull, Rail-to-Rail output type for this comparator.The chip is packaged with Tape & Reel (TR) .The comparator has 5 terminals.Electronic comparator is a component of the Comparator family.In the presence of a 2.7V voltage, the comparator is capable of accomplishing a variety of demanding tasks.In general, the chip type can be classified as General Purpose .Currently, it consists of only 1 elements.There are 5 pins on this board.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.There are 5 pins on the comparator.In order to find a solution that meets your specific needs, search LPV7215 for more pin-to-pin solutions.In this comparator, the quiescent current is 750nA .The board has a Surface Mount for mounting on a PCB or any other board.Normally, the nominal supply current should be 1.03μA .An excess of current supply over 1.03μA could result in malfunction of the comparator.Input current to the device is limited to 400 fA .Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 120dB .Comparator electronics is acceptable to pack the device by TR .
LPV7215MF/NOPB Features
MOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 750nA
Voltage Gain: 120dB
LPV7215MF/NOPB Applications
There are a lot of Texas Instruments LPV7215MF/NOPB linear comparators applications.
- Threshold Detectors
- Pulse, Squarewave, and Time Delay Generators
- DC/DC and AC/DC power supplies
- Window Comparators
- Zero-Crossing Detectors
- Appliances
- Automatic Test Equipment
- Wearable Devices
- Multivibrators and High-Voltage Digital Logic Gates
- Simple Analog-to-Digital Converters (ADCs)
