Parameters |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
5-TSSOP, SC-70-5, SOT-353 |
Number of Pins |
5 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Comparator |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.7V |
Base Part Number |
LPV7215 |
Pin Count |
5 |
Output Type |
MOS, Push-Pull, Rail-to-Rail |
Number of Elements |
1 |
Nominal Supply Current |
1.03μA |
Output Current |
19mA |
Max Supply Current |
1.03μA |
Propagation Delay |
30 μs |
Quiescent Current |
750nA |
Response Time |
15000 ns |
Common Mode Rejection Ratio |
98 dB |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V |
Input Offset Voltage (Vos) |
3mV |
Voltage Gain |
120dB |
Power Supply Rejection Ratio (PSRR) |
82dB |
Supply Voltage Limit-Max |
6V |
Max Input Current |
400 fA |
Input Bias Current |
400 fA |
Current - Quiescent (Max) |
750nA |
Voltage - Input Offset (Max) |
3mV @ 5V |
Current - Input Bias (Max) |
0.4pA @ 5V |
CMRR, PSRR (Typ) |
98dB CMRR, 82dB PSRR |
Current - Output (Typ) |
19mA @ 5V |
Length |
2mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
LPV7215MG Overview
To facilitate transportation, it comes packaged in 5-TSSOP, SC-70-5, SOT-353 .Output type MOS, Push-Pull, Rail-to-Rail is used for this comparator.The part will be shipped by Tape & Reel (TR) .The comparator has 5 terminals.The component belongs to the Comparator family of electrical components.A comparator is capable of completing a variety of demanding tasks when supplied with 2.7V voltage.When it comes to types, this comparator is a typical General Purpose .Electronic comparator consists of 1 elements in total.The device is equipped with 5 pins.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.5 pins are available on the comparator.You can search LPV7215 if you are looking for more pin-to-pin solutions.In this comparator, the quiescent current is 750nA .Mounting on PCBs or other boards is easy with the Surface Mount .Normally, the nominal supply current should be 1.03μA when using the device.An excess of current supply over 1.03μA could result in malfunction of the comparator.Input current to the device cannot exceed 400 fA .A voltage gain of 120dB can be determined from the voltage formula for the part.
LPV7215MG Features
MOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 750nA
Voltage Gain: 120dB
LPV7215MG Applications
There are a lot of Texas Instruments LPV7215MG linear comparators applications.
- Lithium ion battery monitoring
- Simple Analog-to-Digital Converters (ADCs)
- Wireless Base Stations
- Automotive
- Appliances
- Window Comparators, Multivibrators
- Wearable Devices
- Hand-Held Electronics
- General-Purpose, Low-Voltage Applications
- Point of load regulators