LS10E
| Parameters | |
|---|---|
| Mount | Brackets |
| Package / Case | 100 |
| Operating Temperature | 0°C~50°C |
| Published | 2008 |
| Series | LS10 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 12V~30V |
| Ingress Protection | NEMA 1, 2, 3, 12, 13 IEC IP54 |
| Output Configuration | NPN/PNP |
| Output Current | 125mA |
| Response Time | 10ms |
| Sensing Distance | 3.94 ~ 48.03 (100mm ~ 1220mm) |
| Sensing Method | Through-Beam |
| Connection Method | Connector |
| Light Source | Infrared (880nm) |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP54 |
LS10E Overview
In order to work reliably, the photoelectric sensor should be set to 0°C~50°C. To make these electronic components work, they should be supplied with 12V~30V voltage. Sensors with a response time of 10ms are ideal. Photoelectric sensors need 125mA at their outputs to work. As a convenience, here are some photoelectric sensors included in the 100 package.
LS10E Features
Sensing Distance: 3.94 ~ 48.03 (100mm ~ 1220mm)
Response Time: 10ms
Operating Temperature: 0°C~50°C
Available in 100 package
LS10 Series
LS10E Applications
There are a lot of Banner Engineering Corporation LS10E Photoelectric Sensors applications.
- Passive infrared sensors
- Zone scanners
- Pharmaceutical industry
- Counting small objects
- Entrance and gate
- Detecting colours
- detect objects
- Checking objects on production lines or conveyors
- Logistics and materials handling
- Luminescence sensors
