LT1006CN8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Package / Case | DIP |
| Number of Pins | 8 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 28V |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 44V |
| Min Supply Voltage | 4V |
| Operating Supply Current | 360μA |
| Slew Rate | 0.4 V/μs |
| Common Mode Rejection Ratio | 97 dB |
| Current - Input Bias | 25nA |
| Input Offset Voltage (Vos) | 20μV |
| Bandwidth | 600 kHz |
| Gain Bandwidth Product | 600 kHz |
| Voltage Gain | 126.02dB |
| Power Supply Rejection Ratio (PSRR) | 103dB |
| Dual Supply Voltage | 18V |
| Nominal Gain Bandwidth Product | 600 kHz |
| Number of Amplifiers | 1 |
| Height | 3.3mm |
| Length | 10.16mm |
| Width | 6.48mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1006CN8#PBF Overview
A DIP case is used to package the op amp. Linear amplifier includes 8 pins. In terms of the input offset voltage, instrumentation amplifier rates at 20μV. The buffer amplifier is capable of operating from a supply current of 360μA . There should be no change in the voltage gain. The buffer amp consists of 1 circuits in total. 1 channels are available on the instrumentation amplifier. For the buffer op amp to operate properly, it must be above the temperature of 0°C degrees Celsius. No temperature greater than 70°C should be used. The total number of elements in this buffer amplifier is 1. The operating supply voltage of the buffer op amp is rated at 28V. Under 44V is the minimum supply voltage for this electric component. In order to ensure that the instrumentation amplifier's supply voltage remains above 4V, it is recommended to keep it higher. On the linear amplifier, there are 1 amplifiers that are used.
LT1006CN8#PBF Features
126.02dB voltage gain
LT1006CN8#PBF Applications
There are a lot of Analog Devices, Inc. LT1006CN8#PBF Instrumentational OP Amps applications.
- Scintillation detectors
- Large motor controllers
- Automotive sensors
- Weak signal detection
- Signal amplification
- Home audio systems
- Strain gauges
- Biopotential
- Automation control systems
- Hand-held batteries
