LT1006S8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 44V |
| Min Supply Voltage | 4V |
| Operating Supply Current | 360μA |
| Max Supply Current | 570μA |
| Slew Rate | 0.4 V/μs |
| Common Mode Rejection Ratio | 97 dB |
| Current - Input Bias | 25nA |
| Input Offset Voltage (Vos) | 20μV |
| Bandwidth | 600 kHz |
| Voltage Gain | 126.02dB |
| Power Supply Rejection Ratio (PSRR) | 103dB |
| Dual Supply Voltage | 15V |
| Nominal Gain Bandwidth Product | 600 kHz |
| Number of Amplifiers | 1 |
| Height | 1.498mm |
| Length | 5mm |
| Width | 3.988mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1006S8#PBF Overview
Op amp is packaged in SOIC case. An 8-pin op amp ic is included in the package. Op amp ic rates 20μV for input offset voltage. As long as the supply current of the chip does not exceed 360μA, this op amp ic can operate. Maintain 126.02dB as the voltage gain. On this instrumentation amplifier, there are 1 circuits that are connected together. Op amp ic has 1 channels. It is recommended that the temperature of this op amp ic should not fall below 0°C degrees Fahrenheit at any time. Instrumentation amplifier shouldn't be used above 70°C . The total number of elements in this buffer amplifier is 1. The operating supply voltage of instrumentation amplifier is rated 5V voltage. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 44V. In order to ensure that the instrumentation amplifier's supply voltage remains above 4V, it is recommended to keep it higher. As you can see, the linear amplifier has 1 amplifiers.
LT1006S8#PBF Features
126.02dB voltage gain
LT1006S8#PBF Applications
There are a lot of Analog Devices, Inc. LT1006S8#PBF Instrumentational OP Amps applications.
- High speed sample
- Automotive sensors
- Comparator
- Automation control systems
- Fast A/D and D/A converters
- Instrumentation
- Weak signal detection
- Logarithmic operation circuits
- Weighing systems
- pH (acidity)
