Parameters |
Package / Case |
S |
Number of Pins |
8 |
Type |
General Purpose |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Number of Elements |
1 |
Number of Channels |
1 |
Max Supply Voltage |
36V |
Min Supply Voltage |
3V |
Max Supply Current |
4mA |
Current - Output |
50mA |
Quiescent Current |
4mA |
Response Time |
150 ns |
Common Mode Rejection Ratio |
115 dB |
Current - Input Bias |
50nA |
Input Offset Voltage (Vos) |
1.5mV |
Voltage Gain |
113.98dB |
Max Dual Supply Voltage |
15V |
Min Dual Supply Voltage |
2.5V |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
LT1011CS8 Overview
To facilitate transportation, it comes packaged in S .Electronic comparator is possible to classify the chip as General Purpose .A total of 1 elements can be found in it.The comparator has 8 pins.The comparator presents a quiescent current of 4mA volts.An excess of current supply over 4mA could result in malfunction of the comparator.The voltage gain of the part is indicated by 113.98dB in the voltage formula.Temperature higher than 70°C is not recommended.Comparator electronics cannot be operated at temperatures below 0°C .Compatibility is defined as 36V when the comparator is operating at its maximum supply voltage.Using a voltage as low as 3V is possible for this comparator.The output quality is maintained by the cooperation of 1 channels.This device's output current is rated at 50mA .
LT1011CS8 Features
General Purpose IC
Employing 1 elements
Quiescent Current: 4mA
Voltage Gain: 113.98dB
LT1011CS8 Applications
There are a lot of Analog Devices, Inc. LT1011CS8 linear comparators applications.
- Notebooks and PDAs
- Lithium ion battery monitoring
- Zero-Crossing Detectors
- Mobile Communications
- Mobile Phones and Tablets
- Battery management and protection
- General-Purpose, Low-Voltage Applications
- Current and voltage sensing
- Multivibrators and High-Voltage Digital Logic Gates
- Alarm and Monitoring Circuits