LT1012ACN8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | LT1012 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Operating Supply Current | 380μA |
| Max Supply Current | 500μA |
| Slew Rate | 0.2V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 114 dB |
| Current - Input Bias | 25pA |
| Voltage - Supply, Single/Dual (±) | 2.4V~40V ±1.2V~20V |
| Input Offset Voltage (Vos) | 8μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 126.02dB |
| Average Bias Current-Max (IIB) | 0.0003μA |
| Power Supply Rejection Ratio (PSRR) | 114dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 20V |
| Low-Bias | YES |
| Micropower | YES |
| Dual Supply Voltage | 3V |
| Neg Supply Voltage-Max (Vsup) | -20V |
| Nominal Gain Bandwidth Product | 1MHz |
| Height | 3.3mm |
| Length | 10.16mm |
| Width | 6.48mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1012ACN8#PBF Overview
It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. A General Purpose-type buffer amplifier is shown here. Upon delivery, op amp ic is packaged in a Tube case. There is a growing number of terminations approaching the number of 8. There are a total of 8 pins on this op amp. This linear amplifier should be powered by an 15V battery. It should be noted that this op amp is a type of Operational Amplifier device. 8 pins are available on the instrumentation amplifier. There is an input offset voltage of 8μV for this buffer op amp. Through Hole is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at 0°C~70°C. It is possible to operate this buffer amplifier from a supply current of 380μA . Voltage gain should remain at 126.02dB. This linear amplifier has a total of 1 elements.
LT1012ACN8#PBF Features
8 Pins
supply voltage of 15V
126.02dB voltage gain
LT1012ACN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1012ACN8#PBF Instrumentational OP Amps applications.
- Proportional counter tubes
- Division circuits
- Oscilloscopes
- Signal operation
- Professional videography
- Gaming industry
- Broadcasting
- earphone
- Cinema or auditorium audio system
- Band-stop filter
