LT1013CN8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Package / Case | DIP |
| Number of Pins | 8 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 44V |
| Min Supply Voltage | 4V |
| Operating Supply Current | 350μA |
| Slew Rate | 0.4 V/μs |
| Common Mode Rejection Ratio | 97 dB |
| Current - Input Bias | 50nA |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 40μV |
| Bandwidth | 800 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Max Dual Supply Voltage | 22V |
| Min Dual Supply Voltage | 2V |
| Dual Supply Voltage | 15V |
| Nominal Gain Bandwidth Product | 800 kHz |
| Number of Amplifiers | 2 |
| Height | 3.3mm |
| Length | 10.16mm |
| Width | 6.48mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1013CN8#PBF Overview
Op amp is packaged in DIP case. It has 8 pins that make up the linear amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 40μV. A supply current of 350μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 120dB. On this buffer amplifier, there are 2 circuits. As far as the device is concerned, buffer amplifier has 2 channels. In order for this buffer op amp to function, it should have a temperature of at least 0°C degrees Celsius. You should not use op amp above 70°C . This linear amplifier has a total of 2 elements. The operating supply voltage of instrumentation amplifier is rated 5V voltage. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 44V. The linear amplifier's supply voltage should be higher than 4V. The dual supply voltage of 22V should be used for the conduct of this electronic component. A linear amplifier such as this has 2 amplifiers on it.
LT1013CN8#PBF Features
120dB voltage gain
LT1013CN8#PBF Applications
There are a lot of Analog Devices, Inc. LT1013CN8#PBF Instrumentational OP Amps applications.
- Signal filtering
- Subtraction operation circuits
- Automatic control
- Hand-held batteries
- Power control
- Differentiator circuits
- Signal transformation
- E-book readers
- Division circuits
- Radar
