LT1014DSW#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1014 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Operating Supply Current | 350μA |
| Slew Rate | 0.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 97 dB |
| Current - Input Bias | 15nA |
| Voltage - Supply, Single/Dual (±) | 4V~44V ±2V~22V |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 950μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.038μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 22V |
| Voltage - Input Offset | 200μV |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.05μA |
| Dual Supply Voltage | 15V |
| Length | 10.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1014DSW#TRPBF Overview
In the package, you will find a 16-SOIC (0.295, 7.50mm Width)-case to contain the op amp ic. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. We are approaching the 16h termination of the year. In total, there are 16 pins on this op amp ic. It is important to remember that this op amp should be operated at a voltage of 15V volts. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 16 pins are located on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 950μV. Surface Mount is the recommended mounting type for this linear amplifier. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . An 350μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are a total of 4 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5V. It is used TAPE AND REEL to pack the op amps.
LT1014DSW#TRPBF Features
16 Pins
supply voltage of 15V
120dB voltage gain
LT1014DSW#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT1014DSW#TRPBF Instrumentational OP Amps applications.
- Gaming industry
- Differentiator circuits
- Comparator
- earphone
- Computer workstations
- Band-pass filter
- Ultrasound transducers
- Power transmission
- Automation control systems
- Laptop
