LT1014ISW#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 44V |
| Min Supply Voltage | 4V |
| Operating Supply Current | 350μA |
| Nominal Supply Current | 1.4mA |
| Slew Rate | 0.4 V/μs |
| Common Mode Rejection Ratio | 97 dB |
| Current - Input Bias | 50nA |
| Output Current per Channel | 20mA |
| Input Offset Voltage (Vos) | 200μV |
| Bandwidth | 800 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Max Dual Supply Voltage | 22V |
| Min Dual Supply Voltage | 2V |
| Dual Supply Voltage | 15V |
| Number of Amplifiers | 4 |
| Height | 2.238mm |
| Length | 10.11mm |
| Width | 10.643mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1014ISW#PBF Overview
Packaged in a SOIC case, the buffer op amp is ready to use. There are 16 pins on this chip. With regard to input offset voltage, instrumentation amplifier is rated at 200μV. A supply current of 350μA can be used to operate this linear amplifier. Maintain 120dB as the voltage gain. The buffer amp consists of 4 circuits in total. Buffer op amp is equipped with 4 channels on the device. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. It is recommended that op amp be used at temperatures below 85°C. It is possible to count 4 elements on this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 5V voltage. With regard to the supply voltage, this electrical component is capable of working from under 44V. As a rule of thumb, the supply voltage of the op amp should not be lower than 4V. It is recommended that you conduct this electronic part using the dual supply voltage of 22V. There are 4 amplifiers on the op amp.
LT1014ISW#PBF Features
120dB voltage gain
LT1014ISW#PBF Applications
There are a lot of Analog Devices, Inc. LT1014ISW#PBF Instrumentational OP Amps applications.
- Proportional operation circuits
- Communication device
- Radar
- Information processing
- Portable docking station
- Ultrasound transducers
- Biopotential
- Video conversion and routing
- Computer workstations
- High-frequency data acquisition systems
