LT1017CS8#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1017 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Pull Up |
| Number of Elements | 2 |
| Power Supplies | 1.1/40V |
| Output Current | 65mA |
| Propagation Delay | 22 μs |
| Quiescent Current | 60μA |
| Supply Current-Max | 0.1mA |
| Common Mode Rejection Ratio | 110 dB |
| Voltage - Supply, Single/Dual (±) | 1.1V~40V ±0.55V~20V |
| Input Offset Voltage (Vos) | 1mV |
| Voltage Gain | 115dB |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Supply Voltage Limit-Max | 40V |
| Input Bias Current | 15nA |
| Current - Quiescent (Max) | 60μA |
| Voltage - Input Offset (Max) | 1mV @ ±20V |
| Current - Input Bias (Max) | 0.015μA @ ±20V |
| CMRR, PSRR (Typ) | 115dB CMRR, 110dB PSRR |
| Current - Output (Typ) | 65mA @ 4.5V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1017CS8#TRPBF Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .There is a Pull Up output type for this comparator.Ready for shipping in Tape & Reel (TR) package.The device is designed with 8 terminations.The electrical component here belongs to the Comparator family.With a 4.5V voltage supply, the comparator can perform multiple demanding tasks.This is a typical comparator of type General Purpose .There are a total of 2 elements in it.The pinout of the component starts from 8 pins it has.Electronic comparator is recommended that the mounting type be Surface Mount .The operating temperature should be set to 0°C~70°C to avoid mal-function.The comparator has a pin count of 8 .Alternatively, you may search for LT1017 to find more pin-to-pin solutions for your specific needs.There is a quiescent current of 60μA in this comparator.In order to run the device, there are only 1.1/40V power supplies required.According to the voltage formula, the part has a voltage gain of 115dB .Providing a minimum current of 0.1mA is possible for this part.
LT1017CS8#TRPBF Features
Pull Up output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 60μA
Voltage Gain: 115dB
LT1017CS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT1017CS8#TRPBF linear comparators applications.
- RC Timers
- Portable and Battery-Powered Systems
- Zero-Crossing Detectors
- Battery management and protection
- Power management
- Mobile Phones and Tablets
- Pulse, Squarewave, and Time Delay Generators
- Ultra-Low Power Systems
- Portable Battery Monitoring
- Body Control Modules
