LT1017IS8#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Package / Case | S |
| Number of Pins | 8 |
| Type | General Purpose |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 1.2V |
| Current - Output | 65mA |
| Propagation Delay | 22 μs |
| Quiescent Current | 60μA |
| Response Time | 20 μs |
| Common Mode Rejection Ratio | 115 dB |
| Current - Input Bias | 15nA |
| Input Offset Voltage (Vos) | 1mV |
| Voltage Gain | 115dB |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Max Dual Supply Voltage | 20V |
| Min Dual Supply Voltage | 550mV |
| Height | 1.498mm |
| Length | 5mm |
| Width | 3.988mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1017IS8#PBF Overview
The product is packaged in S for ease of transportation.It's a typical General Purpose comparator.In total, it contains 2 elements.8 pins are available on the comparator.There is 60μA current flowing in this comparator.A voltage gain of 115dB can be determined from the voltage formula for the part.There is no need to exceed 85°C in terms of temperature.Comparator electronics cannot be used at a temperature below -40°C .The maximal supply voltage of the comparator is 40V .This comparator allows minimum supply voltage of 1.2V .The output quality is maintained by the cooperation of 2 channels.65mA is the output current of this device.
LT1017IS8#PBF Features
General Purpose IC
Employing 2 elements
Quiescent Current: 60μA
Voltage Gain: 115dB
LT1017IS8#PBF Applications
There are a lot of Analog Devices, Inc. LT1017IS8#PBF linear comparators applications.
- Power Supervision
- Consumer Medical Electronics
- Battery management and protection
- RC Timers
- High-Speed Differential Line Receiver
- Alarm and Monitoring Circuits
- Simple Analog-to-Digital Converters (ADCs)
- Self-diagnostics
- Analog front end
- Set Top Boxes
