LT1018CN8#PBF
| Parameters | |
|---|---|
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Base Part Number | LT1018 |
| Pin Count | 8 |
| Output Type | Pull Up |
| Operating Supply Voltage | 3V |
| Number of Elements | 2 |
| Power Supplies | 1.1/40V |
| Output Current | 70mA |
| Max Supply Current | 250μA |
| Propagation Delay | 6 μs |
| Quiescent Current | 250μA |
| Response Time | 9000 ns |
| Common Mode Rejection Ratio | 115 dB |
| Voltage - Supply, Single/Dual (±) | 1.1V~40V ±0.55V~20V |
| Input Offset Voltage (Vos) | 1mV |
| Voltage Gain | 125dB |
| Average Bias Current-Max (IIB) | 0.1μA |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Supply Voltage Limit-Max | 40V |
| Input Bias Current | 75nA |
| Voltage - Input Offset (Max) | 1mV @ ±20V |
| Current - Input Bias (Max) | 0.075μA @ ±20V |
| CMRR, PSRR (Typ) | 115dB CMRR, 110dB PSRR |
| Current - Output (Typ) | 70mA @ 4.5V |
| Height | 3.3mm |
| Length | 10.16mm |
| Width | 6.48mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
LT1018CN8#PBF Overview
The product is packaged in 8-DIP (0.300, 7.62mm) for ease of transportation.There is a Pull Up output type for this comparator.As a result, it is designed with Tube package.The comparator has a total of 8 terminals.Electronic comparator is a component of the Comparator family.In the presence of a 4.5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.This is a typical comparator of type General Purpose .The total number of elements is 2 .The pinout of the component starts from 8 pins it has.Electronic comparator is recommended that you mount the device using type Through Hole .The operating temperature should be set to 0°C~70°C to avoid mal-function.There are 8 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching LT1018 .There is 250μA current flowing in this comparator.Current supply exceeding 250μA could cause disfunction of the compartator.A power supply of 1.1/40V is sufficient for the operation of the device.According to the voltage formula, the part has a voltage gain of 125dB .Normal operation requires 3V operating supply voltage.
LT1018CN8#PBF Features
Pull Up output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 250μA
Voltage Gain: 125dB
LT1018CN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1018CN8#PBF linear comparators applications.
- Zero-Crossing Detectors
- Window Comparators
- Body Control Modules
- Motor drives
- Battery-Powered Electronics
- Wide Range VCO; MOS Clock Timers
- Current and voltage sensing
- Window Comparators
- General-Purpose, Low-Voltage Applications
- Portable Battery Monitoring
